Brainy Quote of the Day

Showing posts with label 3D Printing. Show all posts
Showing posts with label 3D Printing. Show all posts

Thursday, June 18, 2020

A Scaffold in Time...

A lattice scaffold 3D printed directly onto soft living tissue. (Courtesy: Ohio State University)

Topics: 3D Printing, Bioengineering, Biofabrication, Biology, Tissue Engineering

Tissue engineering is an emerging field in which cells, biomaterials and biotechnologies are employed to replace or regenerate damaged or diseased tissues. Currently, this is achieved by generating a biomaterial scaffold outside of the body, maturation in a bioreactor and then surgically implanting the created tissue into the patient. This surgery, however, poses the added risk of infection, increases recovery time and may even negate the therapeutic benefits of the implant.

To prevent such complications, a US research team is developing a way to fabricate 3D tissue scaffolds inside a living patient – so-called intracorporeal tissue engineering. The researchers, from the Terasaki Institute, Ohio State University and Pennsylvania State University, aim to use robotic direct-write 3D printing to dispense cell-laden biomaterials (bioinks) in a highly precise, programmable manner. The printed bioinks are delivered through minimally invasive surgical incisions and the body itself acts as the bioreactor for maturation.

Any technique used to directly print tissues inside the body, however, must meet a specific set of requirements. The biomaterial must be 3D printable at body temperature (37 °C), for example, and all procedural steps should not harm the patient. For example, current methods use UV light to crosslink the constructed tissue, which is not safe for use within the body.

To meet these requirements, the team produced a specially-formulated bioink designed for printing directly in the body. They used the hydrogel gelatin methacryloyl (GelMA) as the biomaterial, and introduced Laponite and methylcellulose as rheological modifiers to enhance printability. “This bio-ink formulation is 3D printable at physiological temperature, and can be crosslinked safely using visible light inside the body,” explains first author Ali Asghari Adib.

Tissue engineering moves closer to 3D printing inside the body, Tami Freeman, Physics World

Wednesday, November 20, 2019

Transformers...


Topics: 3D Printing, Applied Physics, Research, Robotics, Soft Matter Physics

The researchers likely watched a lot of Saturday morning cartoons in the 1980s: original intro.

(CAMBRIDGE, Mass.) — The majority of soft robots today rely on external power and control, keeping them tethered to off-board systems or rigged with hard components. Now, researchers from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and Caltech have developed soft robotic systems, inspired by origami, that can move and change shape in response to external stimuli, paving the way for fully untethered soft robots.

The research is published in Science Robotics.

3D-printed active hinges change shape in response to heat
Leah Burrows, SEAS Communications, Wyss Institute, Harvard

Monday, November 4, 2019

Hologram Printer...

The new printer uses low-power continuous wave lasers to create holograms on a highly sensitive photomaterial developed by the researchers. Credit: C Yves GENTET

Topics: 3D Objects, 3D Printing, Applied Physics, Holograms, Optics, Research

Researchers have developed a new printer that produces digital 3-D holograms with an unprecedented level of detail and realistic color. The new printer could be used to make high-resolution color recreations of objects or scenes for museum displays, architectural models, fine art or advertisements that do not require glasses or special viewing aids.

"Our 15-year research project aimed to build a hologram printer with all the advantages of previous technologies while eliminating known drawbacks such as expensive lasers, slow printing speed, limited field of view and unsaturated colors," said research team leader Yves Gentet from Ultimate Holography in France. "We accomplished this by creating the CHIMERA printer, which uses low-cost commercial lasers and high-speed printing to produce holograms with high-quality color that spans a large dynamic range."

New printer creates extremely realistic colorful holograms, The Optical Society, Phys.org

Monday, June 3, 2019

Peekaboo Parts...

A transparent human brain by Dr. Ali Ertuerk, Munich, Germany, April 23, 2019.

Topics: 3D Printing, Biomedicine, Research

MUNICH (Reuters) - Researchers in Germany have created transparent human organs using a new technology that could pave the way to print three-dimensional body parts such as kidneys for transplants.

Scientists led by Ali Ertuerk at Ludwig Maximilians University in Munich have developed a technique that uses a solvent to make organs such as the brain and kidneys transparent.

The organ is then scanned by lasers in a microscope that allows researchers to capture the entire structure, including the blood vessels and every single cell in its specific location.

Using this blueprint, researchers print out the scaffold of the organ. They then load the 3D printer with stem cells which act as “ink” and are injected into the correct position making the organ functional.

German scientists create see-through human organs, Ayhan Uyanik, Reuters

Monday, December 17, 2018

Conjuring Ray Palmer...

MIT engineers have devised a way to create 3D nanoscale objects by patterning a larger structure with a laser and then shrinking it. This image shows a complex structure prior to shrinking. Courtesy: Daniel Oran

Topics: 3D Printing, Materials Science, Metamaterials, Nanotechnology, Science Fiction

A new 3D nanofabrication technique called Implosion Fabrication could be used to create a wide variety of nano- and microstructures not previously possible. The technique, which can print 3D objects of nearly any shape by patterning a polymer scaffold with a laser and then shrinking the structure to a thousandth of its original volume, might be used to make novel optical metamaterials and electronics devices.

Shrinking hydrogel scaffold
Most existing nanofabrication techniques are limited in what they can produce. Direct laser writing methods, for example, can produce 2D patterns but not 3D ones, which need to be built up a layer at a time – a process that is difficult and slow. Lithography, one of the oldest nanofabrication techniques, can again only print 2D layers on patterned surfaces.

The apropos cultural reference that absolutely dates me!

Image Source: Wikipedia link below


Raymond "Ray" Palmer, is a physicist and professor at Ivy University in the fictional city of Ivy Town, somewhere in New England, specializing in matter compression as a means to fight overpopulation, famine and other world problems. Using a mass of white dwarf star matter he finds after it lands on Earth, Palmer fashions a lens that enables him to shrink any object to any degree he wishes. Compression destabilizes an object's molecular structure, however, causing it to explode. Source: Wikipedia

It's also the epitome of escapist fiction, since a white dwarf in real life is kind of dense.

Imploding hydrogel shrinks objects to the nanoscale, Belle Dumé, Physics World

Tuesday, July 31, 2018

Downloading Death...

Image source: the Cool t-shirt
Topics: 3D Printing, Civics, Civil Rights, Existentialism, Philosophy, Politics

I'm quoting the actress Alyssa Milano from the CNN article which went live today titled: "A 3D printed gun is downloadable death." Officially tomorrow, it's no longer fantasy.

Below is a repost of a Thursday, March 28, 2013 article "Yin and Yang." Even though the quotes attributed to Einstein I've seen questioned, please note the video embed below. It's no longer speculation. We're here now. The next mass shooting will be undetectable by standard systems; untraceable by serial numbers. Since a 3D printer is not an unsubstantial expense, it will likely be a white male, "lone wolf," but never a "thug" or "terrorist." Or maybe it will be, since an Amazon account can get you a descent one delivered to your doorstep in 2-5 days. It's just the carnage a hostile power bent to turning our daily crumbling republic into a wasteland would want.

Except...this isn't a cartoon.

*****

Yin and yang are actually complementary, not opposing, forces, interacting to form a whole greater than either separate part; in effect, a dynamic system. Everything has both yin and yang aspects, (for instance shadow cannot exist without light). Either of the two major aspects may manifest more strongly in a particular object, depending on the criterion of the observation. The concept of yin and yang is often symbolized by various forms of the Taijitu symbol, for which it is probably best known in Western cultures. (Wikipedia)


Star Trek Blog: Star Trek’s replicator is an amazing technology concept that has fascinated us for decades. Working at the molecular level to synthesize materials, the replicator is able to instantly produce nearly any object, food or medicine on demand. It is easy to imagine how the replicator would quickly change the world. Such a device could dramatically reduce or even eliminate the cost of most products. Hunger and poverty would be stamped out worldwide, and much of the time and energy spent working for a living could be used instead for pursuits of education, exploration and the advancement of society.

Star Trek envisions the future of humanity to be one of incredible achievements made possible by evolved philosophies as well as technologies. This hopeful view of tomorrow is perhaps the reason so many have dreamed of inventing real-life versions of Star Trek tech -- from the transporter to the tricorder -- and the replicator is one of the most coveted.

A process called “additive manufacturing,” or its more popular nickname, “3D Printing,” has captured the imagination of the tech industry. These machines work much like the two-dimensional printer you may have on your desk, but instead of printing a layer of ink, a 3D printer extrudes many layers of melted plastic to form a physical object. You can imagine this as similar to a hot glue gun, where the heated glue stick is carefully extruded from a nozzle. In the case of a 3D printer, that nozzle is controlled by software and digital design files that tells it how to form a shape.

The comparisons between 3D Printing and the Star Trek replicator don’t end with plastic. Other materials like wood, metal and even some foods are now being extruded in similar ways to make on-demand creations. This has led to excited speculation that soon we may see the beginnings of a new era of manufacturing in America and around the world, where small-scale production is possible at very low costs. We may even “print” biotechnologies and human organs one day.

Gene Roddenberry's underlying message of the future: eternal optimism. As much as I am a fan, I'm afraid I possess a healthy dose of skepticism. Even the Star Trek Memory Alpha Wiki mentions some rough roads prior to 1st Contact with Vulcan. I sincerely hope "life does [not] imitate art" in this case (the "rough road" part; 1st Contact would be OK).

The last five mass extinction events were completely involuntary; unassisted since we hadn't showed up just yet. I end below the embed with two quotes from Einstein:



“I don't know what weapons will be used in world war three, but in world war four people will use sticks and stones.”

"We cannot despair of humanity, since we ourselves are human beings."

Yin...Yang...

Wednesday, August 16, 2017

3D Living Tissue...

Image of the 3-D droplet bioprinter, developed by the Bayley Research Group at Oxford, producing mm-sized tissues
Credit: Sam Olof/ Alexander Graham

Topics: 3D Printing, Additive Manufacturing, Biology

Scientists at the University of Oxford have developed a new method to 3D-print laboratory- grown cells to form living structures.

The approach could revolutionize regenerative medicine, enabling the production of complex tissues and cartilage that would potentially support, repair or augment diseased and damaged areas of the body.

In research published in the journal Scientific Reports, an interdisciplinary team from the Department of Chemistry and the Department of Physiology, Anatomy and Genetics at Oxford and the Centre for Molecular Medicine at Bristol, demonstrated how a range of human and animal cells can be printed into high-resolution tissue constructs.

A confocal micrograph of an artificial tissue containing 2 populations human embryonic kidney cells (HEK-293T) printed in the form of an arborized structure within a cube
Credit: Sam Olof / Alexander Graham

Interest in 3D printing living tissues has grown in recent years, but, developing an effective way to use the technology has been difficult, particularly since accurately controlling the position of cells in 3D is hard to do. They often move within printed structures and the soft scaffolding printed to support the cells can collapse on itself. As a result, it remains a challenge to print high-resolution living tissues.

A new method for the 3-D printing of living tissues, Alexander D. Graham et al. High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing, Scientific Reports (2017). DOI: 10.1038/s41598-017-06358-x, Phys.org

Monday, March 21, 2016

Chemical Gardens...

Figure 1. How a chemical garden grows. (a) A metal salt crystal at the bottom of a container with an appropriate alkaline solution begins to dissolve. (b) A thin membrane of metal hydroxide particles forms almost instantly, creating a small acidic compartment. (c) The membrane allows water molecules and hydroxide ions (OH−)(OH-) to flow inward through osmosis, which increases the interior pressure and (d) eventually ruptures the membrane. (e) As the buoyant metal–acid solution rises, the membrane immediately self-heals and a stem forms. The inset shows some details of the often fragile tube.

Citation: Phys. Today 69, 3, 44 (2016); http://dx.doi.org/10.1063/PT.3.3108

Topics: 3D Printing, Additive Manufacturing, Architectural Engineering, Chemistry

I could see a lot of correlation between what is now in vogue - 3D printing/additive manufacturing techniques and different ways we'll construct objects that say, carry medicinal treatments to targeted cancer cells.

I also thought about those crystal garden experiments I'd bug my parents to buy that they eventually acquiesced to doing...something I still appreciate as much as their presence I still miss.

“I shall never forget the sight. The vessel of crystallization was three-quarters full … and from the sandy bottom there strove upwards a grotesque little landscape of variously colored growths: a confused vegetation of blue, green, and brown shoots.”

That is how a character in German novelist and Nobel laureate Thomas Mann’s Doctor Faustus described the colorful mineral structures that he observed spontaneously growing from crystals placed into solution—an experiment that many readers may remember from their childhood chemistry kits or from classroom demonstrations. (See the cover of this issue.) But those experiments are not just toys: Many related systems are found in nature, technology, and the laboratory. First described in 1646 by Johann Glauber, “chemical gardens” are one of chemistry’s oldest fascinations, attracting even the curiosity of Isaac Newton. 1

Though not alive, chemical gardens do exhibit certain characteristics, including self-organization and the formation of membranes, reminiscent of biological systems. Indeed, in the 19th and early 20th centuries the self-assembling structures were thought to reveal insights into the mechanism of life emerging from an inorganic setting.

Today the chemical and molecular aspects of those systems are well understood, and the research focus has shifted to the physics of chemical gardens. The aim is to quantitatively explain basic features such as the growth speed and radius selection in the gardens. Bigger-picture questions are also being addressed that link chemical gardens to a larger class of self-organizing systems far from thermodynamic equilibrium. In that spirit, researchers are investigating macroscopic growth patterns and dynamical complexities such as relaxation oscillations in the system pressure that can lead to twitching and shape changes.

The physical approach reveals perplexing scaling laws and attracts researchers with backgrounds in nonlinear dynamics, pattern formation, self-assembly, and fluid dynamics. Materials scientists could learn potentially important lessons as chemical gardens create macroscopic complexity and hierarchical nano-to-macro architectures. There is even the possibility of making device-like tubes from molecular processes in a new field of study that has been termed chemobrionics. Finally, by studying chemical gardens that form in geological settings, researchers are again focusing on their role in the origins of life on Earth.

Physics Today: The fertile physics of chemical gardens
Oliver Steinbock, Julyan H. E. Cartwright and Laura M. Barge

1. L. M. Barge et al., Chem. Rev. 115, 8652 (2015). http://dx.doi.org/10.1021/acs.chemrev.5b00014

Friday, February 19, 2016

Future Engineers...

Image Source: Tokyo Tech
Topics: 3D Printing, Humor, NASA, Science Fiction, Space Exploration, Star Trek, STEM

I kind of tackled this in the posts Tea, Earl Grey and Kardashev Scales, essentially we're likely not to achieve the clearly miracle technologies that would violate the Heisenberg Uncertainty Principle (I'm pretty certain about that!).

However, the closest approximation to replicators are the 3D printing systems that are becoming almost routine; some mentioned even in the same breath as the 2nd Amendment strangely enough.

It is good, with Star Trek due in 2017 to start now to engage the young in STEM activities that will lead ultimately to the next generation of scientists and engineers that will get us to Mars and beyond.

And, for that consequential and monumentally long journey (barring we survive our own hubris to make the actual trek): we shall have to EAT.


NASA, ASME, Star Trek Challenge Future Engineers to Turn Science Fiction into Science Fact
Future Engineers: Star Trek Replicator Challenge

Friday, January 29, 2016

4-D Printing...

Image Source: Harvard Gazette
Topics: 3D Objects, 3D Printing, Additive Manufacturing, Biology

If you are tired of the hype around 3-D printing, brace yourself, because it’s time to add another “D.” Yesterday, researchers unveiled a new process they can use to “4-D print” flat objects that change into complex shapes when they are immersed in water.

The new demonstration builds on the microscale printing process developed under the leadership of Jennifer Lewis, a materials scientist at Harvard. The images are captivating, but they aren’t just pretty pictures; they also hint at a fundamental new capability that could be applied in useful ways.

This is not the first time we’ve heard about 4-D printing, which refers to printing things that are “programmed” to change shapes later on. Three years ago Skylar Tibbits, a research scientist in MIT’s architecture department, introduced the term at the TED Conference. Tibbits’s process employed two materials, a rigid one and a softer one that expands when put in water.


Technology Review:
Gorgeous New 4-D Printing Process Makes More Than Just Eye Candy, Mike Orcutt

Monday, March 16, 2015

3-D Eta Carinae...

Source: Technology Review


Topics: 3D Printing, Astrophysics, Computational Physics, NASA

TECHNOLOGY REVIEW: In 1843, a relatively unknown star in the constellation of Carina in the southern hemisphere suddenly erupted becoming the second brightest star in the sky after Sirius. This object, called Eta Carinae, gradually decreased in brightness until it faded from view entirely some 40 years later. Since then, it has varied in brightness in a rough a five-year cycle.

Eta Carinae is curious because this variation in brightness occurs over a wide range of wavelengths and timescales. In 1998, for example, it suddenly flared up and doubled in brightness.

The explosion in the 1840s left Eta Carinae surrounded by a spectacular cloud of dust known as the Homunculus Nebula. Astronomers have long known that this eruption did not destroy the star involved, which they thought must sit at the center of this cloud.

About 10 years ago, however, they discovered that this cloud contains two stars in a highly elliptical five-year orbit. This orbit, they decided, must be the cause of the periodic changes in brightness.

But exactly why Eta Carinae is so variable over such a wide range of wavelengths is something of a mystery. Today, Thomas Madura from the NASA Goddard Space Flight Centre in Greenbelt, Maryland, and a few pals provide a detailed insight into the nature of the star system using supercomputer simulations of the way they interact.

Physics arXiv:
3D Printing Meets Computational Astrophysics: Deciphering the Structure of Eta Carinae's Inner Colliding Winds
Thomas I. Madura, Nicola Clementel, Theodore R. Gull, Chael J.H. Kruip, Jan-Pieter Paardekooper

Friday, June 21, 2013

The Smallest Battery...

Saw this on my FB feed from "I f#&$ing love science." This is REALLY fantastic...
A research team from Harvard University and the University of Illinois at Urbana-Champaign has demonstrated the ability to 3D print a battery. This image shows the interlaced stack of electrodes that were printed layer by layer to create the working anode and cathode of a microbattery. (SEM image courtesy of Jennifer A. Lewis.)

Cambridge, Mass. – June 18, 2013 – 3D printing can now be used to print lithium-ion microbatteries the size of a grain of sand. The printed microbatteries could supply electricity to tiny devices in fields from medicine to communications, including many that have lingered on lab benches for lack of a battery small enough to fit the device, yet provide enough stored energy to power them.

To make the microbatteries, a team based at Harvard University and the University of Illinois at Urbana-Champaign printed precisely interlaced stacks of tiny battery electrodes, each less than the width of a human hair.

“Not only did we demonstrate for the first time that we can 3D-print a battery; we demonstrated it in the most rigorous way,” said Jennifer A. Lewis, senior author of the study, who is also the Hansjörg Wyss Professor of Biologically Inspired Engineering at the Harvard School of Engineering and Applied Sciences (SEAS), and a Core Faculty Member of the Wyss Institute for Biologically Inspired Engineering at Harvard University. Lewis led the project in her prior position at the University of Illinois at Urbana-Champaign, in collaboration with co-author Shen Dillon, an Assistant Professor of Materials Science and Engineering there.

The results have been published online in the journal Advanced Materials.

Harvard SEAS: Printing tiny batteries, Dan Ferber, Wyss Institute

Thursday, May 30, 2013

Spiderfab...

Spiderfab is a new concept introduced by NASA and Tethers Unlimited that could change the way that space craft are built in the near future. In theory it will be more efficient to build large structures in space rather than trying to find a launch vehicle large enough to accommodate such an undertaking of this scale. It will also be ideal for a situation in which the exact specifications of the parts needed is not known before liftoff.

Tethers Unlimited was awarded $100,000 to develop the concept of space 3d printing further.

Robert Hoyt, CEO of Tethers Unlimited said, “We’d like someday to be able to have a spacecraft create itself entirely from scratch, but realistically that’s quite a ways out.” ”That’s still science fiction.”

Another private company called Made In Space has been studying the process of using additive manufacturing techniques. They have successfully printed tools in zero gravity. The next step, space.

“3D printing and in-space manufacturing will dramatically change the way we look at space exploration, commercialization, and mission design today.” said Aaron Kemmer, CEO and Co-Founder of MADE IN SPACE. “The possibilities range from building on-demand parts for human missions to building large space habitats that are optimized for space.”

Space Industry News:
NASA Testing 3D Printers in Space To Build Spacecraft and Satellites

Wednesday, May 29, 2013

Tea, Earl Gray, Hot...

...realizing, upon transmission, it should have been "Earl Grey," I just went for it. Too many links to correct now. Smiley

NASA has doled out a research grant to develop a prototype 3D printer for food, so astronauts may one day enjoy 3D-printed pizza on Mars.

Anjan Contractor, a senior mechanical engineer at Systems and Materials Research Corporation (SMRC), based in Austin, Texas, received a $125,000 grant from the space agency to build a prototype of his food synthesizer, as was first reported by Quartz.

NASA hopes the technology may one day be used to feed astronauts on longer space missions, such as the roughly 520 days required for a manned flight to Mars. Manned missions to destinations deeper in the solar system would require food that can last an even longer amount of time.

Space.com: NASA Funds 3D Pizza Printer Denise Chow, SPACE.com Staff Writer

Thursday, March 28, 2013

Yin and Yang...

Yin and yang are actually complementary, not opposing, forces, interacting to form a whole greater than either separate part; in effect, a dynamic system. Everything has both yin and yang aspects, (for instance shadow cannot exist without light). Either of the two major aspects may manifest more strongly in a particular object, depending on the criterion of the observation. The concept of yin and yang is often symbolized by various forms of the Taijitu symbol, for which it is probably best known in Western cultures. (Wikipedia)

Star Trek Blog: Star Trek’s replicator is an amazing technology concept that has fascinated us for decades. Working at the molecular level to synthesize materials, the replicator is able to instantly produce nearly any object, food or medicine on demand. It is easy to imagine how the replicator would quickly change the world. Such a device could dramatically reduce or even eliminate the cost of most products. Hunger and poverty would be stamped out worldwide, and much of the time and energy spent working for a living could be used instead for pursuits of education, exploration and the advancement of society.

Star Trek envisions the future of humanity to be one of incredible achievements made possible by evolved philosophies as well as technologies. This hopeful view of tomorrow is perhaps the reason so many have dreamed of inventing real-life versions of Star Trek tech -- from the transporter to the tricorder -- and the replicator is one of the most coveted.

A process called “additive manufacturing,” or its more popular nickname, “3D Printing,” has captured the imagination of the tech industry. These machines work much like the two-dimensional printer you may have on your desk, but instead of printing a layer of ink, a 3D printer extrudes many layers of melted plastic to form a physical object. You can imagine this as similar to a hot glue gun, where the heated glue stick is carefully extruded from a nozzle. In the case of a 3D printer, that nozzle is controlled by software and digital design files that tells it how to form a shape.

The comparisons between 3D Printing and the Star Trek replicator don’t end with plastic. Other materials like wood, metal and even some foods are now being extruded in similar ways to make on-demand creations. This has led to excited speculation that soon we may see the beginnings of a new era of manufacturing in America and around the world, where small-scale production is possible at very low costs. We may even “print” biotechnologies and human organs one day.

Gene Roddenberry's underlying message of the future: eternal optimism. As much as I am a fan, I'm afraid I possess a healthy dose of skepticism. Even the Star Trek Memory Alpha Wiki mentions some rough roads prior to 1st Contact with Vulcan. I sincerely hope "life does [not] imitate art" in this case (the "rough road" part; 1st Contact would be OK).

The last five mass extinction events were completely involuntary; unassisted since we hadn't showed up just yet. I end below the embed with two quotes from Einstein:



“I don't know what weapons will be used in world war three, but in world war four people will use sticks and stones.”

"We cannot dispair of humanity, since we ourselves are human beings."

Yin...Yang...