Brainy Quote of the Day

Showing posts with label Green Energy. Show all posts
Showing posts with label Green Energy. Show all posts

Wednesday, August 14, 2019

CSP...

Argonne and Oak Ridge scientists plan to demonstrate sensors for concentrating solar power plants – like the Crescent Dunes Solar Energy Project, shown here – that can monitor and safely maintain molten salt above 700 Celsius. (Image courtesy of SolarReserve and the U.S. Department of Energy.)

Topics: Alternative Energy, Green Energy, Green Technology, Solar Power

Scientists at Argonne and Oak Ridge national laboratories are drawing on decades of nuclear research on salts to advance a promising solar technology.

Nuclear power and solar power may seem like very different energy sources. Nuclear power stems from the energy released when neutrons crash into uranium atoms, splitting them apart. Solar power stems from the sunlight beaming down on earth. But some solar plants convert that light into heat, which can be used just like the heat of a nuclear reactor to generate steam to make electricity. And both energy sources often share a key ingredient: salt.

Engineers sometimes use molten salt to fuel and cool nuclear reactors. As nuclear fuel, salt is attractive because it withstands radiation and can operate at near-normal pressure and relatively low temperatures. Salt also remains fairly inert and stable within the nuclear fuel cycle. Now engineers from the U.S. Department of Energy’s (DOE) Argonne and Oak Ridge national laboratories are drawing on decades of nuclear research on salts to advance a solar technology called concentrating solar-thermal power (CSP).


In the heat of the light, Dave Bukey, Argonne National Laboratory

Thursday, July 25, 2019

The Caveat of Clean...

Data: Wood Mackenzie; Chart: Axios Visuals

Topics: Alternative Energy, Climate Change, Global Warming, Green Energy

I am proudly the owner of all battery-powered lawn equipment: lawn mower, hedger; weed edger and blower (a twofer). All require a few hours of charging to power and get me through a typical pruning in roughly two hours. I did it in a nod to the environment, but also so I wouldn't have to get gas for a mower or lug electrical extension cords around. The purchases admittedly were more pragmatic than progressive.

The unfortunate reality is batteries like anything else we use come from raw materials. The world is limited in volume, even though we're on it and these raw materials to construct the things we utilize and enjoy are not in unlimited supply.

Problems are never simple to solve, else they wouldn't be problems.

*****

There could be a "supply crunch" for cobalt, lithium, and nickel used in batteries for electric vehicles and other applications as soon as the mid-2020s, the consultancy Wood Mackenzie said Wednesday.

The big picture: The chart above shows their projections of demand for materials used in EVs but also batteries needed for consumer electronics and energy storage.

What's next: Wood Mackenzie forecasts that pure electrics and plug-in hybrids combined will account for 7% of all passenger car sales by 2025, 14% by 2030 and 38% by 2040.

Of note: That's less bullish than BloombergNEF, which sees EVs accounting for 57% of passenger car sales in 2040.

The bottom line: "The electrification of transport is redefining a number of metals markets," Wood Mackenzie said in a release summarizing their analysis.

Troubles may loom for the battery supply chain for electric vehicles
Ben Geman, Axios

Wednesday, April 17, 2019

Snow TENG...

A new nanogenerator could harvest energy directly from snow, helping solar panels deal with wintry conditions(Credit: karin59 /Depositphotos)

Topics: Alternative Energy, Green Energy, Green Tech, Nanotechnology

Snowy places aren't ideal for harvesting solar energy – panels can't do much if they're buried under blankets of snow, of course. Now a team from the University of California Los Angeles (UCLA) has developed a new device that can produce electricity from snow itself.

The team calls the new device a snow-based triboelectric nanogenerator, or Snow TENG. As the name suggests it works off the triboelectric effect, meaning it uses static electricity to generate a charge through the exchange of electrons. These kinds of devices have been used to make generators that pull energy from body movements, touchscreens, and even footsteps on floors.

Snow is positively charged, so rubbing it against a material with the opposite charge allows energy to be drawn out of it. After a comprehensive series of testing, the team settled on silicone as the most effective material.

The Snow TENG, which is 3D printable, is made with a layer of silicone attached to an electrode. The team says it could be integrated into solar panels, so they can continue generating electricity even when covered with snow, making it similar to an earlier hybrid solar cell that also harvested energy from the movement of raindrops on its surface.

Snow-powered nanogenerator works where solar panels don't
Michael Irving, New Atlas

Monday, January 28, 2019

Room Tc...

The cage-like crystal structure (LaH10) thought to be responsible for the high-temperature superconductivity observed in this study. Courtesy: R Hemley

Topics: Green Energy, Materials Science, Quantum Mechanics, Superconductors

Note: Room temperature is 300 K, which is 26.85 Celsius, 80.33 Fahrenheit.

A team of researchers from George Washington University in the US is saying that a hydride of lanthanum compressed to 200 GPa (2 Mbars) could be superconducting at temperatures near room temperature – a result that has been backed up with findings from another group in Germany. The results could be a major step towards realizing the long-sought goal of room-temperature superconductivity for energy applications.

Superconductivity is the ability of a material to conduct electricity without any resistance. It is observed in many materials when they are cooled to below their superconducting transition temperature (Tc). In the Bardeen-Cooper-Schrieffer (BCS) theory of (“conventional”) superconductivity, this occurs when electrons overcome their mutual electrical repulsion and form “Cooper pairs” that then travel unheeded through the material as a supercurrent.

Superconductivity was first observed in 1911 in solid mercury below a Tc of 4.2K (--268.95 Celsius, --452.11 Fahrenheit) and the search for room-temperature superconductors has been on ever since. Room-temperature superconductivity would help considerably improve the efficiency of electrical generators and transmission lines, as well simplify current applications of superconductivity, such as superconducting magnets in particle accelerators.

Researchers came a step closer to this holy grail with the high-temperature superconducting copper oxides, which were discovered in the 1990s and which have a Tc above liquid helium temperatures. It was only in 2015, however, that they discovered that hydrogen sulphide has a Tc of 203 K when compressed to pressures of 150 GPa. This result spurred a flurry of interest in the compressed hydrides – that is, solid materials containing hydrogen atoms bonded to other elements.

Dramatic resistance drop at 260 K
“We believe that a Tc at – or very near – room temperature has finally been realized,” says Russell Hemley, who led this latest research effort.

Thanks to quantum-mechanics-based calculations, Hemley’s group first predicted that lanthanum hydride (LaH10) could be superconducting in July 2017. The researchers then synthesized the material, and reported direct measurements of its conductivity that indicated a Tc of 260 K (-13.15 Celsius, 8.33 Fahrenheit) at 180-200 GPa in May 2018, posting a paper on the arXiv in August 2018 that has now been published in Physical Review Letters. A team led by Mikhail Eremets at the Max Planck Institute for Chemistry in Germany reported on a Tc of 250 K (-23.15 Celsius, -9.67 Fahrenheit) for lanthanum hydride synthesized at pressures of around 170 GPa in independent work posted on the arXiv in December 2018.

Quantum-mechanics-based calculations for “materials by design”
The researchers say they have reproduced their result many times and also have preliminary magnetic susceptibility data that point to room-temperature superconductivity. To unequivocally prove, however, that this is indeed the case will require them to observe the Meissner effect (the expulsion of magnetic field from a material when it becomes superconducting) in LaH10. This is challenging, they admit, but preliminary results from experiments on their samples at the Argonne National Laboratory in Illinoisare encouraging. Further work is also needed to characterize the superconducting properties of structures other than LaH10 in their samples that they have predicted and observed using X-ray diffraction.

On the road to room-temperature superconductivity, Belle Dumé, Physics World

Wednesday, January 9, 2019

Earth's AT-ATs...

Image Source: Link below
Topics: Green Energy, Green Tech, Mechanical Engineering, Robotics, Star Wars

Ironically, I drive a Hyundai Santa Fe (2013). But I'm satisfied with its performance, so I don't think I'll be "trading up" to this one. Plus, it's designed primarily for first responders.

You have to admit: it resembles Imperial Walkers or AT-AT's (all-terrain, armored tanks), from a movie franchise "long, long ago; in a galaxy far, far away." Heck, they even say it in the article.


Hyundai started 2019 off right by teasing a concept vehicle that could allegedly walk and climb. Now, Hyundai has brought this concept to CES 2019, and it's every bit as wild as we hoped.

Hyundai used CES 2019 as the backdrop to debut its Elevate walking car concept. While it's primarily designed to give first responders an additional edge in rescuing people, it can also be used to enhance mobility options for all sorts of citizens.

According to Hyundai, the Elevate is capable of driving at highway speeds, but it can also allegedly climb a 5-foot wall, step over a 5-foot gap and have a track width up to 15 feet. So, it's basically an AT-AT from Star Wars that has, as Hyundai puts it, "both mammalian and reptilian walking gaits."

CES 2019: Hyundai's walking car concept is perfect for first responders, Andrew Krok, CNET

Tuesday, January 8, 2019

Nano Zappers...

Topics: Biology, Cancer, Electromagnetic Radiation, Green Energy, Nanotechnology, Research

One potentially valuable way to attack cancer cells is to zap them with low-intensity alternating current. This interferes with the flow of calcium and potassium ions in and out of the cells, a process so important that disrupting it ultimately kills them.

But there is a problem with this approach: healthy cells are just as susceptible to ion channel disruption as cancer cells, so the treatment kills healthy and cancerous cells alike. What’s needed is a way to focus the treatment on cancer cells while leaving the healthy ones untouched.

Enter Attilio Marino at the Istituto Italiano di Tecnologia, Enrico Almici at the Polytechnic University of Turin, and colleagues in Italy. These guys use piezoelectric nanoparticles that generate current inside the body when repeatedly compressed with ultrasound. And they have gathered the first evidence that this could be turned into an effective treatment for cancer.

The technique is straightforward in theory. Piezoelectric materials generate a charge when squeezed (and similarly change shape when zapped with a voltage). They are widely used in everything from microphones to motors.

Marino and co’s idea is to inject biocompatible nanoparticles into the body and then bombard them with ultrasound. The high and low pressures associated with the ultrasound should cause the nanoparticles to generate a charge that interferes with ion channels and kills the cells. The team choose barium titanate nanoparticles, which are considered biocompatible since they contain no lead.

Electric nanoparticles can target and kill cancer cells by zapping them
Emerging Technology, arXiv

Monday, September 24, 2018

Mimicking Nature...

Image Source: Link below
Topics: Alternative Energy, Chemistry, Green Energy, Nanotechnology, Photosynthesis

During photosynthesis, plants split water into hydrogen ions and oxygen. If researchers could devise a method to mimic nature, the hydrogen could provide a carbon-neutral energy source. A significant challenge to implementing such a technology is developing a system that separates the electrons and the positively charged holes; otherwise, the hydrogen and oxygen could react back into water. Researchers led by Jacek Stolarczyk of Ludwig-Maximilians University Munich and Frank Würthner of the University of Würzburg may have overcome the difficulty by introducing two intermediaries—an oxidation catalyst and platinum particles—to a novel semiconducting nanorod.

The researchers started with an approach that already generated hydrogen but at the nanorod’s expense. When a cadmium sulfide nanorod in water absorbs light, the energy spurs the donation of electrons to a platinum reducing agent. The free H+ can then form H2. But without an oxidation catalyst, the arrangement is unsustainable because the remaining holes oxidize the nanorod’s sulfur lattice. The figure illustrates the researchers’ solution: decorating a newly synthesized CdS nanorod with both platinum nanoparticles and an oxidation catalyst.

The process begins when the nanorod absorbs light, which mobilizes electrons. The oxidation catalyst then draws holes from the length of the nanorod. Each Pt tip attached to either end of the nanorod acts as the electron sink. The oxidation half reaction (red arrows) removes electrons from OH− to produce O2 and water; the reduction half reaction (blue arrows) uses the electrons to covalently bond hydrogen atoms to generate H2. The researchers deployed a fresh chemical group to attach the catalyst to the nanorod. With that innovation, the anchoring group was more resistant to oxidation and the holes were swiftly transferred to the catalyst. (C. M. Wolff et al., Nat. Energy, 2018, doi:10.1038/s41560-018-0229-6.)

New nanoarchitecture generates hydrogen, Alex Lopatka, Physics Today

Monday, May 14, 2018

Induced Seismicity...

Mechanisms of induced seismicity
Both wastewater injection and gas extraction can cause induced earthquakes. Detailed observations from the midwestern United States and Groningen, Netherlands, show that in both cases, preexisting conditions in Earth's crust are of central importance

Topics: Alternative Energy, Earthquake, Geophysics, Green Energy

Since 2009, the Midwestern United States has seen a dramatic rise in earthquakes induced by human activities. Most of these events were caused by massive reinjection of wastewater produced during oil and gas extraction (1, 2). In February 2016, regulators in Oklahoma called for an injection rate reduction after several major events up to moment magnitude 5.8 (Mw 5.8) occurred. On the other side of the Atlantic, an unprecedented number of earthquakes has followed gas extraction from the Groningen field in the Netherlands (3). The Dutch government imposed production cuts after a Mw 3.6 event in August 2012 caused structural damage to houses. Intensive research of these two instances of induced seismicity points to contrasting mechanisms, but in both cases, the natural conditions prior to subsurface activities play a dominant part.

Fifty years ago, Healy et al. determined that fluid injection at depth causes the pore pressure to rise in a preexisting fault, reducing its strength and potentially leading to its failure (4). In contrast, fluid extraction at depth reduces the pore pressure, leading to compaction of the rock mass; the increased rock stress can drive a preexisting fault to failure. In both settings, the two factors that control induced earthquakes are operational parameters, such as the volume that is injected or produced, and natural conditions, such as the presence of preexisting faults and their ambient stress level. Operational parameters are often assumed to dominate, but that notion may reflect limited knowledge of the locations of preexisting faults and their ambient stress level. For regulatory measures to be effective in mitigating induced seismicity, it is crucial to understand the role of the natural conditions that existed before human activities.

How earthquakes are induced
Thibault Candela, Brecht Wassing, Jan ter Heege, Loes Buijze
Science

Tuesday, May 1, 2018

Funnel Booster...

a) Schematic shows the band structure of the semiconducting HfS2/HfO2 when under strain, and the consequent charge funnelling. b) The strain is induced in the semiconductor by creating a region of oxide using intense laser light. c) A photocurrent map of the device; the photoresponse drastically increases when a region (dashed circle, bottom) is oxidized, compared with the same device before oxidation (top), a sign of the charge funnelling effect. Figure reproduced with permission from the authors and Nature Communications.

Topics: Green Energy, Green Tech, Laser, Nanotechnology, Semiconductor Technology, Solar Power

Note: Radiant solar energy = 1.1 x 1018 kilowatt hours/year; 3.013 x 1015 kilowatt hours/day. We're literally "leaving money on the table"... for fossil fuel greed.

Source: United Nations World Energy Assessment: Energy and the Challenge of Sustainability

Funnels are efficient tools for channelling liquids into containers with narrow openings. Now, researchers in Exeter have demonstrated the first funnel for electrical charges on a chip. The discovery builds on the ability to oxidize the atomically thin semiconductor, hafnium disulphide (HfS2), with a high-intensity UV laser. The non-uniform strain between oxidized and non-oxidized regions, and the subsequent band-gap modulation, generates electric fields, which effectively funnel the charges in the semiconductor flakes to areas where they can be more easily collected. This concept could enable a new generation of solar cells with 60% efficiency (currently around 21%), thanks to the increased efficiency in collecting photo-excited charges and the potential for hot-carrier extraction.

Intense laser light means oxidation, oxidation means strain

In general, bulk semiconductors can only sustain strains up to 0.4% before breaking. However, a layer of semiconductor that is only a few atoms thick can support strains of up to 25%. This amount of strain changes the band gap in the energy dispersion by up to 1 eV. In this work, Saverio Russo and his group at the University of Exeter, induce the strain in the HfS2 using a 375 nm laser to remove sulphur atoms, which are then replaced by oxygen atoms. According to calculations performed using density functional theory, the hafnium atoms have different separations in HfS2 and HfO2. This produces a 2.7% strain at the boundary between the oxidized and non-oxidized regions. Electrical contacts anchor the material to a substrate, so a strain gradient is present across the whole flake, shifting asymmetrically the conduction and valence bands to higher energies, and opening the band gap by 30 meV.

Funneling charges to boost solar-cell efficiency, Lauren Barr, PhD, network contributor for nanotechweb.org

Thursday, April 19, 2018

Psst!...

Illustration shows the nanoresonator coating, consisting of thousands of tiny glass beads, deposited on solar cells. The coating enhances both the absorption of sunlight and the amount of current produced by the solar cells.

Credit: K. Dill, D. Ha, G. Holland/NIST

Topics: Alternative Energy, Green Energy, Green Tech, Nanotechnology, NIST, Solar Power

Trapping light with an optical version of a whispering gallery, researchers at the National Institute of Standards and Technology (NIST) have developed a nanoscale coating for solar cells that enables them to absorb about 20 percent more sunlight than uncoated devices. The coating, applied with a technique that could be incorporated into manufacturing, opens a new path for developing low-cost, high-efficiency solar cells with abundant, renewable and environmentally friendly materials.

The coating consists of thousands of tiny glass beads, only about one-hundredth the width of a human hair. When sunlight hits the coating, the light waves are steered around the nanoscale bead, similar to the way sound waves travel around a curved wall such as the dome in St. Paul’s Cathedral in London. At such curved structures, known as acoustic whispering galleries, a person standing near one part of the wall easily hears a faint sound originating at any other part of the wall.

Whispering galleries for light were developed about a decade ago, but researchers have only recently explored their use in solar-cell coatings. In the experimental set up devised by a team including Dongheon Ha of NIST and the University of Maryland’s NanoCenter, the light captured by the nanoresonator coating eventually leaks out and is absorbed by an underlying solar cell made of gallium arsenide.

Psst! A Whispering Gallery for Light Boosts Solar Cells, Ben P. Stein, NIST

Wednesday, March 28, 2018

Lithium Air Battery...

"The new battery design protects the lithium metal anode with a coating of lithium carbonate. That allows lithium ions from the anode to enter the electrolyte while keeping unwanted compounds from reaching the anode. It’s easy to create this protective layer, too. The researchers just had to run a few charge-discharge cycles with a pure carbon dioxide atmosphere, and a crystal mesh of lithium carbonate accumulated." Extreme Tech
Topics: Alternative Energy, Green Energy, Green Tech, Solar Power

The lithium-ion battery has transformed the portable electronics industry and is making inroads into energy storage on the electric grid and electrically powered transportation. Today, research laboratories around the world are seeking to develop beyond-lithium-ion batteries that are even more powerful, cheaper, safer and longer lived.

As reported in the journal Nature, a team of scientists from the University of Illinois at Chicago and the U.S. Department of Energy’s (DOE) Argonne National Laboratory has produced a new design for a beyond-lithium-ion battery cell that operates by running on air (hence, referred to as “lithium-air”) over many charge and discharge cycles. Larry Curtiss, co-principal investigator and Argonne Distinguished Fellow, observed that the team’s article was appealing to Nature because “others have tried to build lithium-air battery cells that run on air, but they failed because of little cycle life.”

“This first demonstration of a true lithium-air battery is an important step toward what we call ‘beyond-lithium-ion’ batteries.” — Amin Salehi-Khojin, assistant professor, University of Illinois at Chicago.

The problem with past technology has been that battery cells tested in the lab required a separate supply of pure oxygen (hence, referred to as lithium-oxygen batteries). As a consequence, a tank of oxygen gas would have to be part of the battery system, making it prohibitive for use in electric vehicles due to space requirements. A lithium-air battery that uses air from outside eliminates this problem.

The key features of the team’s newly developed battery cell are a new protective coating for the lithium metal anode, which prevents the anode from reacting with oxygen and hence deteriorating, and a novel electrolyte mixture that allows the cell to operate in an air atmosphere. In tests under an air environment, this cell maintained high performance during 700 cycles, far surpassing previous technology. According to Amin Salehi-Khojin, co-principal investigator and assistant professor at the University of Illinois at Chicago, “The energy storage capacity was about three times that of a lithium-ion battery, and five times should be easily possible with continued research. This first demonstration of a true lithium-air battery is an important step toward what we call beyond-lithium-ion batteries.”

Out Of thin air, Joe Harmon, Argonne National Laboratory

Monday, February 12, 2018

ReCell EV Batteries...

Add caption

Topics: Alternative Energy, Green Energy, Green Tech, Research

A novel model developed at the U.S. Department of Energy’s (DOE) Argonne National Laboratory allows industry, the Department and others to gauge the impact of recycling batteries in electric vehicles. It could further energize this market.


“Argonne has a long track record of expertise in battery research and development, and now we have added the ability to examine every step along the way, from manufacturing to recycling,” said Argonne’s Jeff Spangenberger, the project leader.

From cathodes to anodes and electrolytes, Argonne’s understanding of batteries, combined with ReCell, a closed-loop battery recycling model, offers preliminary estimates of total costs as well as environmental impacts such as carbon dioxide emissions. The model breaks down each process from when a battery leaves the factory to when it is recycled.

Argonne’s ReCell model can provide information to manufacturers up front, so those manufacturers can determine life cycle costs with precision and provide batteries to consumers with minimal environmental and economic impacts. Argonne’s researchers have designed ReCell to be versatile and adapt to the challenges that recycling of lithium ion batteries present, such as differing battery chemistries and formats.

Closing the loop on battery recycling, Karen Ehlers, Argonne National Laboratory

Tuesday, December 19, 2017

Laser Fusion...

Credit: ORNL
Topics: Green Energy, Green Tech, Lasers, Nuclear Fusion, Nuclear Physics

A laser-driven technique for creating fusion that dispenses with the need for radioactive fuel elements and leaves no toxic radioactive waste is now within reach, say researchers.

Dramatic advances in powerful, high-intensity lasers are making it viable for scientists to pursue what was once thought impossible: creating fusion energy based on hydrogen-boron reactions. And an Australian physicist is in the lead, armed with a patented design and working with international collaborators on the remaining scientific challenges.

In a paper in the scientific journal Laser and Particle Beams today, lead author Heinrich Hora from the University of New South Wales in Sydney and international colleagues argue that the path to hydrogen-boron fusion is now viable, and may be closer to realization than other approaches, such as the deuterium-tritium fusion approach being pursued by U.S. National Ignition Facility (NIF) and the International Thermonuclear Experimental Reactor under construction in France.

"I think this puts our approach ahead of all other fusion energy technologies," said Hora, who predicted in the 1970s that fusing hydrogen and boron might be possible without the need for thermal equilibrium. Rather than heat fuel to the temperature of the Sun using massive, high-strength magnets to control superhot plasmas inside a doughnut-shaped toroidal chamber (as in ITER), hydrogen-boron fusion is achieved using two powerful lasers in rapid bursts, which apply precise non-linear forces to compress the nuclei together.

Laser-driven technique for creating fusion is now within reach, say researchers
More information: H. Hora et al, Road map to clean energy using laser beam ignition of boron-hydrogen fusion, Laser and Particle Beams (2017).
DOI: 10.1017/S0263034617000799

Monday, November 13, 2017

Clams and Biofuel...

Penn researchers are collaborating to study how giant clams convert sunlight into energy, which could lead to more efficient production of biofuel. Photo credit: Malcolm Browne

Topics: Biochemistry, Green Energy, Materials Science, Nanotechnology, Physics, Solar Power

Alison Sweeney of the University of Pennsylvania has been studying giant clams since she was a postdoctoral fellow at the University of California, Santa Barbara. These large mollusks, which anchor themselves to coral reefs in the tropical waters of the Indian and Pacific oceans, can grow to up to three-feet long and weigh hundreds of pounds. But their size isn’t the only thing that makes them unique.​​​​​​​​​​​​​​Anyone who has ever gone snorkeling in Australia or the western tropical Pacific Ocean, Sweeney says, may have noticed that the surfaces of giant clams are iridescent, appearing to sparkle before the naked eye. The lustrous cells on the surface of the clam scatter bright sunlight, which typically runs the risk of causing fatal damage to the cell, but the clams efficiently convert the sunlight into fuel. Using what they learn from these giant clams, the researchers hope to improve the process of producing biofuel.

​​​​​​​Sweeney, an assistant professor of physics in the Penn School of Arts and Sciences, and her collaborator Shu Yang, a professor of materials science and engineering in the School of Engineering and Applied Science, refer to the clams as “solar transformers” because they are capable of absorbing bright sunlight at a very high rate and scattering it over a large surface area. When the light is distributed evenly among the thick layer of algae living inside the clam, the algae quickly converts the light into energy.

“What those sparkly cells are doing,” Sweeney says, “is causing light to propagate very deeply into the clam tissue and spread out.”

“What those sparkly cells are doing,” Sweeney says, “is causing light to propagate very deeply into the clam tissue and spread out.”

After coming across Sweeney’s work, Yang struck up a collaboration to see if they could mimic the system by abstracting the principles of the clam’s process to create a material that works similarly. She and Ph.D. student Hye-Na Kim devised a method of synthesizing nanoparticles and adding them to an emulsion — a mixture of water, oil, and soapy molecules called surfactants — to form microbeads mimicking the iridocytes, the cells in giant clams responsible for solar transforming. Their paper has been published in Advanced Materials.

Penn Researchers Working to Mimic Giant Clams to Enhance the Production of Biofuel
Ali Sundermier, Evan Lerner, University of Pennsylvania News

Monday, November 7, 2016

Solar Steam Generator...

Figure 1. A three-layer steam generator consists of a selective absorber insulated above with bubble wrap and below with polystyrene foam. Because conductive, convective, and radiative losses are suppressed, most of the solar heat captured by the absorber is channeled to a small slot where the absorber is in contact with water. (Adapted from ref. 1 .)

Citation: Phys. Today 69, 11, 17 (2016); http://dx.doi.org/10.1063/PT.3.3351
Topics: Climate Change, Global Warming, Green Energy, Green Tech, Solar Power

A combination of inexpensive materials collects and concentrates heat from the Sun.

Heating water to its boiling point is an important first step not only for preparing a cup of tea or a bowl of pasta, but for a range of applications fundamental to an industrial society, including distillation, sterilization, and power generation. In a solar economy, one could boil water with an electric heater powered by a photovoltaic cell. But it would be far more efficient to use solar energy to heat the water directly.

That’s manifestly possible. For decades solar steam turbines in wide-open sunny spaces have used arrays of mirrors to concentrate sunlight from a large area onto a small volume of water. But those mirrors are expensive: They must be precisely machined to focus light over several hundred meters, and they must be mounted on motors to track the Sun’s position in the sky. Because the motors require that a powerful source of electricity already be available, optical concentrating arrays aren’t suitable to smaller-scale or off-the-grid applications, such as sterilizing medical instruments in a clinic in the developing world.

Now MIT’s Gang Chen, George Ni, and their colleagues have demonstrated a different approach: concentrating not the Sun’s light but its heat.1 Because their steam generator consists entirely of commonly available materials—a conscious choice on their part—they estimate that per unit area, it could be built for just 1–3% of the cost of an array of motorized mirrors.

The device is sketched in figure 1. It works by absorbing solar energy over a large area but giving it nowhere to escape except through a small slot where the absorber is in contact with a reservoir of ambient-temperature water. If the absorption area is large enough and the contact area is small enough, the water is locally brought to a boil to release steam before the heat can diffuse out into the bulk liquid. The challenge, then, is to keep the absorber from losing too much heat to conduction, convection, and radiation. Normally—and not unfortunately—those losses prevent any object heated by unconcentrated sunlight from getting anywhere near 100 °C.

To limit conductive and convective losses, the researchers insulated the top and bottom of the absorbing layer. For the bottom layer, they used ordinary polystyrene foam, which also kept the device afloat. The choice of top layer was a bit more constrained, because they needed something optically transparent. So they tried bubble wrap. “I was surprised by how well the bubble wrap worked,” said Ni. “Most researchers are using high-performance materials, and here we were, testing out bubble wrap, which wasn’t designed for maximum optical clarity.” Indeed, the bubble wrap transmits only 80% of the light that hits it. But its insulation benefits far outweighed that modest optical inefficiency.

Physics Today: Solar steam generator needs no lenses or mirrors, Johanna L. Miller

Monday, July 11, 2016

Fuels and Futures...

Figure 1. The correlation between hydrocarbon-based power consumption and economic output for most countries on Earth. A power-law fit finds that annual GDP per person is G = $10 500 (C/kW)0.64, where C is hydrocarbon-based energy consumption per second per person. The tight power-law relationship indicates that economic prosperity is not currently feasible without consumption of hydrocarbon fuels. The power law is reminiscent of scaling laws in biology; 15 the flow of petroleum through economies resembles the flow of blood in mammals. On average, the hydrocarbon power consumed in the US is 8 kW per person, the same as 80 incandescent 100 W bulbs burning continuously. If the US were to rely only on its currently available renewables—biomass cogeneration, wood, hydropower, geothermal, wind, passive solar, and photovoltaics—power consumption would drop to four bulbs per person; eliminating hydropower and biofuels would reduce the number to one or two. The reduction would entail such a change in lifestyle as to make the US unrecognizable. 16 (Data source: Central Intelligence Agency, World Factbook, 2015; DOE/Energy Information Administration, 2015.)

Citation: Phys. Today 69, 7, 46 (2016); http://dx.doi.org/10.1063/PT.3.3236

Topics: Alternative Energy, Economy, Green Energy, Green Tech, Politics

President George W. Bush famously said: "we're addicted to oil." That's an understatement, as it is evident this is the underpinning of the planetary economy.

The sad part is, without physics to give an intervention of sorts, the kind of utopia envisioned by Gene Roddenberry in Star Trek is highly unlikely. We're already showing the strains of automation, globalization and trade deals without a forethought on the impacts with populations at the bottom of societal ladders. It makes way for demagogues in the US, the UK and elsewhere that don't quite have a clue how to solve the problem, but play into xenophobic fears (as evidenced) to their advantage.

To contend with the challenges of fueling modern society, the physics community must collaborate with other disciplines and remain broadly engaged in research and education on energy.

For how long and in what ways can humans sustain the energy-intensive way of life we take for granted? That consequential question is one that physicists must help answer. As we pass the middle of 2016, oil prices are at a 10-year low, partly because of the surge in production of oil and natural gas from fracking. The current fracking boom may ease the transition to a new mix of energy resources. Conversely, it may make us complacent and delay the transition or incite popular resentment and impede the transition.

The physics community must participate in shaping how energy issues play out over the coming decades. The development of fusion reactors, photovoltaic cells, and other potential energy sources clearly requires contributions from physicists. As educators, many of us occupy the central position of teaching students the very definition of energy and the fundamental limits on extraction of free energy from heat. Beyond the classroom, we should all be concerned with the public’s understanding of what energy means. Even in the specific case of fossil fuels, there is room for our increased technical engagement through collaboration.

Physics Today: Physics, fracking, fuel, and the future
Michael Marder, Tadeusz Patzek and Scott W. Tinker

Monday, June 27, 2016

Dubai Solar Power...

Topics: Alternative Energy, Green Energy, Green Tech, Solar Power

It's almost a contradiction in terms: Dubai [investing in] solar power? You'd think in the US, the only saving grace is from coal and "drill-baby-drill." We're as isolated from the rest of the planet as the hapless voters in Brexit, told as a sad story from oligarchs only interested in making money the same way they always have to low-information voters they happily manipulate to their own ends. There are twice as many solar jobs than coal, but the crowd that holds on to Halcyon memories of mining's dominance don't want to hear they may have to retrain to retain their middle class status. When the people, countries and culture primarily responsible for fossil fuels are looking in another direction, it's time the rest of us all started paying attention. Apparently, we (in the US) cannot "walk and chew gum."

They like to do things big in Dubai, including a newly-approved concentrated solar power project that will generate 1,000 megawatts of power by 2020—and a whopping 5,000 megawatts by 2030.

The Dubai Water and Electricity Authority (DEWA) has announced the launch of the world’s largest concentrated solar power (CSP) project. Located on a single site within the Mohammed Bin Rashid Al Maktoum Solar Park, the plant will consist of five facilities. The first phase of the project is expected to be completed either in late 2020 or 2021, at which time it’s expected to generate 1,000 MW of power. By 2030, this plant could be churning out five times that amount—enough to raise the emirate’s total power output by 25 percent. [1]

The share of global electricity generated by solar photovoltaics (PV) could increase from 2 per cent today to as much as 13 per cent by 2030, according to a new report from the International Renewable Energy Agency (IRENA).

Released yesterday at InterSolar Europe, Letting in the Light: How Solar Photovoltaics Will Revolutionise the Electricity System finds the solar industry is poised for massive expansion, driven primarily by cost reductions. It estimates that solar PV capacity could reach between 1,760 and 2,500 gigawatts (GW) by 2030, up from 227 GW today. [2]

1. Dubai Is Building the World’s Largest Concentrated Solar Power Plant
George Dvorsky, Institute for Ethics and Emerging Technologies
2. SOLAR ENERGY COULD MEET UP TO 13 PER CENT OF GLOBAL POWER NEEDS BY 2030: IRENA, United Arab Emirate - Interact

Monday, March 28, 2016

Clean Tech and Small Business...

One of the small businesses with whom Argonne will collaborate is Transient Plasma Systems (TPS) of Torrance, Calif. TPS has developed a new type of ignition system that allows engines to run leaner or tolerate higher levels of recirculated exhaust gas, thereby increasing efficiency. Pictured is Argonne researcher Michael Pamminger working on a test engine that will be used as part of the TPS-Argonne collaboration.

Topics: Economy, Green Energy, Green Tech, Jobs, Mechanical Engineering, STEM

THIS is the type of innovation that could have global reach, yet keep jobs in the US as long as we're prepared to fill them. For our youth, it's a matter of the education infrastructure preparing them for jobs of the future; for slightly older workers, it could be a few semesters of retraining at a community college.

The U.S. Department of Energy's (DOE's) Argonne National Laboratory will be joining forces with three small businesses to advance innovative, clean transportation technologies as part of a larger program to help emerging firms access the resources of national laboratories.

DOE's Office of Energy Efficiency and Renewable Energy (EERE) issued 33 vouchers with a total value of $6.7 million in the first round of the Small Business Vouchers (SBV) Pilot, which matches small businesses with national laboratories to provide technical assistance to help bring next-generation clean energy technologies to market. Applications are currently being accepted for the second round, with a third round to follow.

The three companies selected by DOE to work with Argonne — Transient Plasma Systems (TPS), Connected Signals and Big Delta Systems (BDS) — each received vouchers to pursue vehicle-related research ranging from a new type of engine ignition system to new battery materials to innovative ways to empower motorists to drive more efficiently.

Argonne National Laboratory:
Three clean tech small businesses matched with Argonne in DOE program
Greg Cunningham

Thursday, March 3, 2016

STEP...

The Solar Thermal Electrochemical Process (STEP) converts atmospheric carbon dioxide into carbon nanotubes that can be used in advanced batteries. Credit: Julie Turner, Vanderbilt University
Topics: Alternative Energy, Carbon Nanotubes, Climate Change, Global Warming, Green Energy, Green Tech, Greenhouse Gases, Nanotechnology

An interdisciplinary team of scientists has worked out a way to make electric vehicles that are not only carbon neutral, but carbon negative, capable of actually reducing the amount of atmospheric carbon dioxide as they operate.

They have done so by demonstrating how the graphite electrodes used in the lithium-ion batteries that power electric automobiles can be replaced with carbon material recovered from the atmosphere.

The recipe for converting carbon dioxide gas into batteries is described in the paper titled "Carbon Nanotubes Produced from Ambient Carbon Dioxide for Environmentally Sustainable Lithium-Ion and Sodium-Ion Battery Anodes" published in the Mar. 2 issue of the journal ACS Central Science.

The unusual pairing of carbon dioxide conversion and advanced battery technology is the result of a collaboration between the laboratory of Assistant Professor of Mechanical Engineering Cary Pint at Vanderbilt University and Professor of Chemistry Stuart Licht at George Washington University.

Friday, January 15, 2016

Umbilical Cord...

NUNNOVATION: Renewable energy can help create jobs
Topics: Alternative Energy, Green Energy, Green Tech, Nuclear Fusion, Nuclear Power

Gas prices are falling ($1.95 in New York), and has nothing to do with the current president or any of the 43 previous. Prognostications of $6/gallon have been highly exaggerated.

However, there are more than a few financial posts regarding how lower prices at the pump are hurting, not helping the economy (albeit a biased opinion). There are obvious ties to war and retail grocery prices, for example. In a global economy where the manufacturing jobs of yesteryear have been outsourced to other countries, solar has outpaced coal in employees. Employment is a good way to stabilize a society.

It makes it quite obvious that as a species, we're not ready to let go of the umbilical cord to fossil fuels. Our economy is the numerator; dead dinosaurs its denominator. Old money has been created pretty much by Jed Clampett's "black gold"; "Texas tea."

There will sadly, be as legion a resistance to nuclear fusion once it is possible as there has been against solar power. I hope the decision of how we proceed centers on survival rather than "trickled-up" profits. Personifying the economy as a tree: If the trunk burns, usually the canopy will inexorably  follow.

Investopedia: How Gas Prices Affect The Economy, Jean Folger
National Funding: How Gas Prices Affect Small Business and the Economy
Wall Street Journal: The Effects of Lower Oil Prices