Brainy Quote of the Day

Showing posts with label Solar Power. Show all posts
Showing posts with label Solar Power. Show all posts

Thursday, April 9, 2020

Silicon Sees the Light...

Silicon sees the light: Elham Fadaly (left) and Alain Dijkstra in their Eindhoven lab. (Courtesy: Sicco van Grieken/SURF)

Topics: Optics, Electrical Engineering, Nanotechnology, Research, Solar Power, Spectroscopy

A light-emitting silicon-based material with a direct bandgap has been created in the lab, fifty years after its electronic properties were first predicted. This feat was achieved by an international team led by Erik Bakkers at Eindhoven University of Technology in the Netherlands. They describe the new nanowire material as the “Holy Grail” of microelectronics. With further work, light-emitting silicon-based devices could be used to create low-cost components for optical communications, computing, solar energy and spectroscopy.

Silicon is the wonder material of electronics. It is cheap and plentiful and can be fabricated into ever smaller transistors that can be packed onto chips at increasing densities. But silicon has a fatal flaw when it comes to being used as a light source or solar cell. The semiconductor has an “indirect” electronic bandgap, which means that electronic transitions between the material’s valence and conduction bands involve vibrations in the crystal lattice. As a result, it is very unlikely that an excited electron in the conduction band of silicon will decay to the valence band by emitting light. Conversely, the absorption of light by silicon does not tend to excite valence electrons into the conduction band – a requirement of a solar cell.

Silicon-based light emitter is ‘Holy Grail’ of microelectronics, say researchers
Hamish Johnston, Physics World

Tuesday, September 24, 2019

2D MXenes...

Helper two-dimensional metal-carbide layers could improve perovskite solar cell stability and help make these complex solar cells a viable green energy option. Credit: iStock Milos-Muller

Topics: Condensed Matter Physics, Green Tech, Materials Science, Metamaterials, Nanotechnology, Solar Power

With the reality of climate change looming, the importance of realistic green energy sources is higher than ever. Solar cells are one promising avenue, as they can convert readily available visible and ultraviolet energy into usable electricity. In particular, perovskite materials sandwiched between other support layers have demonstrated impressive power conversion efficiencies. Current challenges reside in optimizing perovskite/support layer interfaces, which can directly impact power conversion and cell degradation. Researchers Antonio Agresti et al. under the direction of Aldo Di Carlo at the University of Rome Tor Vergata in Italy have investigated how cells containing two-dimensional titanium-carbide MXene support layers could improve perovskite solar cell performance.

To obtain good power conversion within a perovskite solar cell, all layers and layer interfaces within the cell must have good compatibility. Typical cells contain the active perovskite material sandwiched between two charge transport layers, which are then adjacent to their corresponding electrodes. Support layers may also be added. Charge mobility, energy barriers, interface energy alignment, and interfacial vacancies all impact compatibility and subsequent cell performance and stability. Thus, engineering well-suited interfaces with the cell is paramount to cell success and long-term stability, an important criterion for potential commercialization.

Two-dimensional buffer materials could help to modify and promote useful interface interactions. MXenes, a growing class of two-dimensional transitional metal carbides, nitrides, and carbonitrides, have shown impressive electronic properties that are easily tuned via surface modification. For example, the band gap of an MXene can be modified by changing the surface termination group from an oxygen atom to a hydroxide molecule. Additionally, MXene composition impacts the overall material performance. This type of fine-tuning allows impressive control over MXene properties and makes them ideal for interface adjustments.

Two-dimensional MXenes improve perovskite solar cell efficiency
Amanda Carr, Physics World

#P4TC: MXenes...August 24, 2015

Wednesday, August 14, 2019

CSP...

Argonne and Oak Ridge scientists plan to demonstrate sensors for concentrating solar power plants – like the Crescent Dunes Solar Energy Project, shown here – that can monitor and safely maintain molten salt above 700 Celsius. (Image courtesy of SolarReserve and the U.S. Department of Energy.)

Topics: Alternative Energy, Green Energy, Green Technology, Solar Power

Scientists at Argonne and Oak Ridge national laboratories are drawing on decades of nuclear research on salts to advance a promising solar technology.

Nuclear power and solar power may seem like very different energy sources. Nuclear power stems from the energy released when neutrons crash into uranium atoms, splitting them apart. Solar power stems from the sunlight beaming down on earth. But some solar plants convert that light into heat, which can be used just like the heat of a nuclear reactor to generate steam to make electricity. And both energy sources often share a key ingredient: salt.

Engineers sometimes use molten salt to fuel and cool nuclear reactors. As nuclear fuel, salt is attractive because it withstands radiation and can operate at near-normal pressure and relatively low temperatures. Salt also remains fairly inert and stable within the nuclear fuel cycle. Now engineers from the U.S. Department of Energy’s (DOE) Argonne and Oak Ridge national laboratories are drawing on decades of nuclear research on salts to advance a solar technology called concentrating solar-thermal power (CSP).


In the heat of the light, Dave Bukey, Argonne National Laboratory

Tuesday, May 1, 2018

Funnel Booster...

a) Schematic shows the band structure of the semiconducting HfS2/HfO2 when under strain, and the consequent charge funnelling. b) The strain is induced in the semiconductor by creating a region of oxide using intense laser light. c) A photocurrent map of the device; the photoresponse drastically increases when a region (dashed circle, bottom) is oxidized, compared with the same device before oxidation (top), a sign of the charge funnelling effect. Figure reproduced with permission from the authors and Nature Communications.

Topics: Green Energy, Green Tech, Laser, Nanotechnology, Semiconductor Technology, Solar Power

Note: Radiant solar energy = 1.1 x 1018 kilowatt hours/year; 3.013 x 1015 kilowatt hours/day. We're literally "leaving money on the table"... for fossil fuel greed.

Source: United Nations World Energy Assessment: Energy and the Challenge of Sustainability

Funnels are efficient tools for channelling liquids into containers with narrow openings. Now, researchers in Exeter have demonstrated the first funnel for electrical charges on a chip. The discovery builds on the ability to oxidize the atomically thin semiconductor, hafnium disulphide (HfS2), with a high-intensity UV laser. The non-uniform strain between oxidized and non-oxidized regions, and the subsequent band-gap modulation, generates electric fields, which effectively funnel the charges in the semiconductor flakes to areas where they can be more easily collected. This concept could enable a new generation of solar cells with 60% efficiency (currently around 21%), thanks to the increased efficiency in collecting photo-excited charges and the potential for hot-carrier extraction.

Intense laser light means oxidation, oxidation means strain

In general, bulk semiconductors can only sustain strains up to 0.4% before breaking. However, a layer of semiconductor that is only a few atoms thick can support strains of up to 25%. This amount of strain changes the band gap in the energy dispersion by up to 1 eV. In this work, Saverio Russo and his group at the University of Exeter, induce the strain in the HfS2 using a 375 nm laser to remove sulphur atoms, which are then replaced by oxygen atoms. According to calculations performed using density functional theory, the hafnium atoms have different separations in HfS2 and HfO2. This produces a 2.7% strain at the boundary between the oxidized and non-oxidized regions. Electrical contacts anchor the material to a substrate, so a strain gradient is present across the whole flake, shifting asymmetrically the conduction and valence bands to higher energies, and opening the band gap by 30 meV.

Funneling charges to boost solar-cell efficiency, Lauren Barr, PhD, network contributor for nanotechweb.org

Thursday, April 19, 2018

Psst!...

Illustration shows the nanoresonator coating, consisting of thousands of tiny glass beads, deposited on solar cells. The coating enhances both the absorption of sunlight and the amount of current produced by the solar cells.

Credit: K. Dill, D. Ha, G. Holland/NIST

Topics: Alternative Energy, Green Energy, Green Tech, Nanotechnology, NIST, Solar Power

Trapping light with an optical version of a whispering gallery, researchers at the National Institute of Standards and Technology (NIST) have developed a nanoscale coating for solar cells that enables them to absorb about 20 percent more sunlight than uncoated devices. The coating, applied with a technique that could be incorporated into manufacturing, opens a new path for developing low-cost, high-efficiency solar cells with abundant, renewable and environmentally friendly materials.

The coating consists of thousands of tiny glass beads, only about one-hundredth the width of a human hair. When sunlight hits the coating, the light waves are steered around the nanoscale bead, similar to the way sound waves travel around a curved wall such as the dome in St. Paul’s Cathedral in London. At such curved structures, known as acoustic whispering galleries, a person standing near one part of the wall easily hears a faint sound originating at any other part of the wall.

Whispering galleries for light were developed about a decade ago, but researchers have only recently explored their use in solar-cell coatings. In the experimental set up devised by a team including Dongheon Ha of NIST and the University of Maryland’s NanoCenter, the light captured by the nanoresonator coating eventually leaks out and is absorbed by an underlying solar cell made of gallium arsenide.

Psst! A Whispering Gallery for Light Boosts Solar Cells, Ben P. Stein, NIST

Wednesday, March 28, 2018

Lithium Air Battery...

"The new battery design protects the lithium metal anode with a coating of lithium carbonate. That allows lithium ions from the anode to enter the electrolyte while keeping unwanted compounds from reaching the anode. It’s easy to create this protective layer, too. The researchers just had to run a few charge-discharge cycles with a pure carbon dioxide atmosphere, and a crystal mesh of lithium carbonate accumulated." Extreme Tech
Topics: Alternative Energy, Green Energy, Green Tech, Solar Power

The lithium-ion battery has transformed the portable electronics industry and is making inroads into energy storage on the electric grid and electrically powered transportation. Today, research laboratories around the world are seeking to develop beyond-lithium-ion batteries that are even more powerful, cheaper, safer and longer lived.

As reported in the journal Nature, a team of scientists from the University of Illinois at Chicago and the U.S. Department of Energy’s (DOE) Argonne National Laboratory has produced a new design for a beyond-lithium-ion battery cell that operates by running on air (hence, referred to as “lithium-air”) over many charge and discharge cycles. Larry Curtiss, co-principal investigator and Argonne Distinguished Fellow, observed that the team’s article was appealing to Nature because “others have tried to build lithium-air battery cells that run on air, but they failed because of little cycle life.”

“This first demonstration of a true lithium-air battery is an important step toward what we call ‘beyond-lithium-ion’ batteries.” — Amin Salehi-Khojin, assistant professor, University of Illinois at Chicago.

The problem with past technology has been that battery cells tested in the lab required a separate supply of pure oxygen (hence, referred to as lithium-oxygen batteries). As a consequence, a tank of oxygen gas would have to be part of the battery system, making it prohibitive for use in electric vehicles due to space requirements. A lithium-air battery that uses air from outside eliminates this problem.

The key features of the team’s newly developed battery cell are a new protective coating for the lithium metal anode, which prevents the anode from reacting with oxygen and hence deteriorating, and a novel electrolyte mixture that allows the cell to operate in an air atmosphere. In tests under an air environment, this cell maintained high performance during 700 cycles, far surpassing previous technology. According to Amin Salehi-Khojin, co-principal investigator and assistant professor at the University of Illinois at Chicago, “The energy storage capacity was about three times that of a lithium-ion battery, and five times should be easily possible with continued research. This first demonstration of a true lithium-air battery is an important step toward what we call beyond-lithium-ion batteries.”

Out Of thin air, Joe Harmon, Argonne National Laboratory

Monday, November 13, 2017

Clams and Biofuel...

Penn researchers are collaborating to study how giant clams convert sunlight into energy, which could lead to more efficient production of biofuel. Photo credit: Malcolm Browne

Topics: Biochemistry, Green Energy, Materials Science, Nanotechnology, Physics, Solar Power

Alison Sweeney of the University of Pennsylvania has been studying giant clams since she was a postdoctoral fellow at the University of California, Santa Barbara. These large mollusks, which anchor themselves to coral reefs in the tropical waters of the Indian and Pacific oceans, can grow to up to three-feet long and weigh hundreds of pounds. But their size isn’t the only thing that makes them unique.​​​​​​​​​​​​​​Anyone who has ever gone snorkeling in Australia or the western tropical Pacific Ocean, Sweeney says, may have noticed that the surfaces of giant clams are iridescent, appearing to sparkle before the naked eye. The lustrous cells on the surface of the clam scatter bright sunlight, which typically runs the risk of causing fatal damage to the cell, but the clams efficiently convert the sunlight into fuel. Using what they learn from these giant clams, the researchers hope to improve the process of producing biofuel.

​​​​​​​Sweeney, an assistant professor of physics in the Penn School of Arts and Sciences, and her collaborator Shu Yang, a professor of materials science and engineering in the School of Engineering and Applied Science, refer to the clams as “solar transformers” because they are capable of absorbing bright sunlight at a very high rate and scattering it over a large surface area. When the light is distributed evenly among the thick layer of algae living inside the clam, the algae quickly converts the light into energy.

“What those sparkly cells are doing,” Sweeney says, “is causing light to propagate very deeply into the clam tissue and spread out.”

“What those sparkly cells are doing,” Sweeney says, “is causing light to propagate very deeply into the clam tissue and spread out.”

After coming across Sweeney’s work, Yang struck up a collaboration to see if they could mimic the system by abstracting the principles of the clam’s process to create a material that works similarly. She and Ph.D. student Hye-Na Kim devised a method of synthesizing nanoparticles and adding them to an emulsion — a mixture of water, oil, and soapy molecules called surfactants — to form microbeads mimicking the iridocytes, the cells in giant clams responsible for solar transforming. Their paper has been published in Advanced Materials.

Penn Researchers Working to Mimic Giant Clams to Enhance the Production of Biofuel
Ali Sundermier, Evan Lerner, University of Pennsylvania News

Friday, August 4, 2017

Being Inconvenient...

Image Source: Triple Pundit: People, Planet, Profit, "How Germany Became a Solar Superpower"
Topics: Climate Change, Global Warming, Green Tech, Politics, Solar Power

In our slow-shuffle to global mediocrity, Germany and China are quickly filling the vacuum that could be occupied by American technological leadership.

Solar panels require factories to build them. That requires a fleet of implanter systems (high-energy particle accelerators) to dope the silicon, making it such that it collects energy from the sun in the form of electricity - phosphorous for electrons and boron to encourage holes:

Simply put, a solar panel works by allowing photons, or particles of light, to knock electrons free from atoms, generating a flow of electricity. Solar panels actually comprise many, smaller units called photovoltaic cells. (Photovoltaic simply means they convert sunlight into electricity.) Many cells linked together make up a solar panel.

Each photovoltaic cell is basically a sandwich made up of two slices of semi-conducting material, usually silicon — the same stuff used in microelectronics.

To work, photovoltaic cells need to establish an electric field. Much like a magnetic field, which occurs due to opposite poles, an electric field occurs when opposite charges are separated. To get this field, manufacturers "dope" silicon with other materials, giving each slice of the sandwich a positive or negative electrical charge.

Source: Live Science

I consider solar power helping with climate change and cleaner air fridge benefits. The main benefit is something we hope our political leaders are focused on: jobs.

The presence of factories positively stresses every aspect of society around it. What do I mean by that? K-12 and post-secondary education aligns to prepare future workers at the management, engineering and technicians at all levels, hopefully eschewing moribund standardized tests, i.e. the testing industrial complex's educational "bridge to nowhere." The place needs administrative assistants, plumbers, painters, carpenters, electricians, janitors, carpet and floor cleaners and if a cafeteria is on site, cooks! UPS, DHL and the US Postal Service will have to staff stations and trucks to make deliveries as well as airlines assigned to them. In other words, EVERY aspect of full employment at every level in this country, whether one has a college degree or not.

My concern is for running fossil fuels literally "to the last drop" and scoring short-sighted political points, we miss the long-term benefits of employing our citizens and stabilizing our society for the Common Good, regardless of which party is in power.

*****

In the early 2000s Al Gore emerged from a devastating presidential election defeat with a new quest: to warn the world about global warming. Although some may think his climate work peaked with his 2005 film, An Inconvenient Truth, he has taken his mission far beyond the silver screen. Over the past decade the former vice president has trained thousands of climate leaders who are now spreading awareness about global warming in communities around the planet. He has also worked with government leaders on switching energy economies from fossil fuels to renewables, and has traveled to places such as Greenland and India to witness firsthand the damaging effects of our carbon-addicted world. Now Gore is back in theaters on August 4 with An Inconvenient Sequel: Truth to Power to convince the public we desperately need to act on climate change—and fast.

Why did you feel the need for a sequel to An Inconvenient Truth?

The 10-year anniversary of the first movie seemed like a good time to come back and tell the audience what’s new. There have been two huge changes in the last decade. Number one: climate-related extreme weather events have become far more serious and frequent, validating the predictions of the scientific community. [We wanted to give] people a visceral understanding of how these changes are affecting people all over the world, including throughout the United States. The scientific community has tremendous credibility, but it turns out Mother Nature is more persuasive than any of us.

The second big change: the solutions are here now. A decade ago they were visible on the horizon, but we had to rely on technology experts to reassure us they were coming. Now the stunning cost reductions for solar electricity, wind electricity, batteries, electric vehicles and hundreds of impressive efficiency improvements are all dramatically improving our ability to reduce emissions and become far more efficient.

We are now in the early stages of a global sustainability revolution, which has the magnitude of the industrial revolution and the speed of the digital revolution. Global emissions have stabilized in the last three years, giving hope that emissions will start reducing significantly very soon, as they have already done in the U.S., Europe and China.

Al Gore Says Climate's Best Hope Lies in Cities and Solar Power, Annie Sneed, Scientific American

Related link:

Film Review: ‘An Inconvenient Sequel: Truth to Power’, Owen Gleiberman, Chief Film Critic, Variety

Monday, November 7, 2016

Solar Steam Generator...

Figure 1. A three-layer steam generator consists of a selective absorber insulated above with bubble wrap and below with polystyrene foam. Because conductive, convective, and radiative losses are suppressed, most of the solar heat captured by the absorber is channeled to a small slot where the absorber is in contact with water. (Adapted from ref. 1 .)

Citation: Phys. Today 69, 11, 17 (2016); http://dx.doi.org/10.1063/PT.3.3351
Topics: Climate Change, Global Warming, Green Energy, Green Tech, Solar Power

A combination of inexpensive materials collects and concentrates heat from the Sun.

Heating water to its boiling point is an important first step not only for preparing a cup of tea or a bowl of pasta, but for a range of applications fundamental to an industrial society, including distillation, sterilization, and power generation. In a solar economy, one could boil water with an electric heater powered by a photovoltaic cell. But it would be far more efficient to use solar energy to heat the water directly.

That’s manifestly possible. For decades solar steam turbines in wide-open sunny spaces have used arrays of mirrors to concentrate sunlight from a large area onto a small volume of water. But those mirrors are expensive: They must be precisely machined to focus light over several hundred meters, and they must be mounted on motors to track the Sun’s position in the sky. Because the motors require that a powerful source of electricity already be available, optical concentrating arrays aren’t suitable to smaller-scale or off-the-grid applications, such as sterilizing medical instruments in a clinic in the developing world.

Now MIT’s Gang Chen, George Ni, and their colleagues have demonstrated a different approach: concentrating not the Sun’s light but its heat.1 Because their steam generator consists entirely of commonly available materials—a conscious choice on their part—they estimate that per unit area, it could be built for just 1–3% of the cost of an array of motorized mirrors.

The device is sketched in figure 1. It works by absorbing solar energy over a large area but giving it nowhere to escape except through a small slot where the absorber is in contact with a reservoir of ambient-temperature water. If the absorption area is large enough and the contact area is small enough, the water is locally brought to a boil to release steam before the heat can diffuse out into the bulk liquid. The challenge, then, is to keep the absorber from losing too much heat to conduction, convection, and radiation. Normally—and not unfortunately—those losses prevent any object heated by unconcentrated sunlight from getting anywhere near 100 °C.

To limit conductive and convective losses, the researchers insulated the top and bottom of the absorbing layer. For the bottom layer, they used ordinary polystyrene foam, which also kept the device afloat. The choice of top layer was a bit more constrained, because they needed something optically transparent. So they tried bubble wrap. “I was surprised by how well the bubble wrap worked,” said Ni. “Most researchers are using high-performance materials, and here we were, testing out bubble wrap, which wasn’t designed for maximum optical clarity.” Indeed, the bubble wrap transmits only 80% of the light that hits it. But its insulation benefits far outweighed that modest optical inefficiency.

Physics Today: Solar steam generator needs no lenses or mirrors, Johanna L. Miller

Wednesday, July 20, 2016

Wearable Photovoltaics...

Ultra-thin solar cells are flexible enough to bend around small objects, such as the 1mm-thick edge of a glass slide, as shown here.
CREDIT: Juho Kim, et al/APL
Topics: Consumer Electronics, Electrical Engineering, Materials Science, Photovoltaics, Solar Power

WASHINGTON, D.C., June 20, 2016 -- Scientists in South Korea have made ultra-thin photovoltaics flexible enough to wrap around the average pencil. The bendy solar cells could power wearable electronics like fitness trackers and smart glasses. The researchers report the results in the journal Applied Physics Letters, from AIP Publishing.

Thin materials flex more easily than thick ones -- think a piece of paper versus a cardboard shipping box. The reason for the difference: The stress in a material while it's being bent increases farther out from the central plane. Because thick sheets have more material farther out they are harder to bend.

“Our photovoltaic is about 1 micrometer thick,” said Jongho Lee, an engineer at the Gwangju Institute of Science and Technology in South Korea. One micrometer is much thinner than an average human hair. Standard photovoltaics are usually hundreds of times thicker, and even most other thin photovoltaics are 2 to 4 times thicker.

AIP: Ultra-thin Solar Cells Can Easily Bend Around a Pencil, Catherine Meyers

Monday, June 27, 2016

Dubai Solar Power...

Topics: Alternative Energy, Green Energy, Green Tech, Solar Power

It's almost a contradiction in terms: Dubai [investing in] solar power? You'd think in the US, the only saving grace is from coal and "drill-baby-drill." We're as isolated from the rest of the planet as the hapless voters in Brexit, told as a sad story from oligarchs only interested in making money the same way they always have to low-information voters they happily manipulate to their own ends. There are twice as many solar jobs than coal, but the crowd that holds on to Halcyon memories of mining's dominance don't want to hear they may have to retrain to retain their middle class status. When the people, countries and culture primarily responsible for fossil fuels are looking in another direction, it's time the rest of us all started paying attention. Apparently, we (in the US) cannot "walk and chew gum."

They like to do things big in Dubai, including a newly-approved concentrated solar power project that will generate 1,000 megawatts of power by 2020—and a whopping 5,000 megawatts by 2030.

The Dubai Water and Electricity Authority (DEWA) has announced the launch of the world’s largest concentrated solar power (CSP) project. Located on a single site within the Mohammed Bin Rashid Al Maktoum Solar Park, the plant will consist of five facilities. The first phase of the project is expected to be completed either in late 2020 or 2021, at which time it’s expected to generate 1,000 MW of power. By 2030, this plant could be churning out five times that amount—enough to raise the emirate’s total power output by 25 percent. [1]

The share of global electricity generated by solar photovoltaics (PV) could increase from 2 per cent today to as much as 13 per cent by 2030, according to a new report from the International Renewable Energy Agency (IRENA).

Released yesterday at InterSolar Europe, Letting in the Light: How Solar Photovoltaics Will Revolutionise the Electricity System finds the solar industry is poised for massive expansion, driven primarily by cost reductions. It estimates that solar PV capacity could reach between 1,760 and 2,500 gigawatts (GW) by 2030, up from 227 GW today. [2]

1. Dubai Is Building the World’s Largest Concentrated Solar Power Plant
George Dvorsky, Institute for Ethics and Emerging Technologies
2. SOLAR ENERGY COULD MEET UP TO 13 PER CENT OF GLOBAL POWER NEEDS BY 2030: IRENA, United Arab Emirate - Interact

Tuesday, April 26, 2016

'Spooky Action' In Photosynthesis...

Dipole-dipole interactions between two chromophores were imaged on the atomic level using scanning tunneling microscopy.
Image credit: Guoyan Wang and Daping Sun
Topics: Biology, Materials Science, Quantum Mechanics, Solar Power

Photosynthesis and other vital biological reactions depend on the interplay between electrically polarized molecules. For the first time, scientists have imaged these interactions at the atomic level. The insights from these images could help lead to better solar power cells, researchers added.

Atoms in molecules often do not equally share their electrons. This can lead to electric dipoles, in which one side of a molecule is positively charged while the other side is negatively charged. Interactions between dipoles are critical to biology -- for instance, the way large protein molecules fold -- often depend on how the electric charges of dipoles attract or repel each other.

One process where dipole coupling is key is photosynthesis. During photosynthesis, dipole coupling helps chromophores – molecules that can absorb and release light – transfer the energy that they capture from sunlight to other molecules that convert it to chemical energy.

Intriguingly, a consequence of dipole coupling is that chromophores may experience a strange phenomenon known as quantum entanglement. Quantum physics suggests that the world is a fuzzy, surreal place at its very smallest levels. Objects experiencing quantum entanglement are better thought of as a single collective than as standalone objects, even when separated in space. Quantum entanglement means that chromophore properties can strongly depend on the number, orientations and positions of their neighbors.

Inside Science: Scientists Capture 'Spooky Action' In Photosynthesis, Charles Q. Choi

Wednesday, September 2, 2015

Mimicking Nature...

Image Source: Argonne National Laboratory
Topics: Alternative Energy, Green Energy, Green Tech, Photosynthesis, Solar Power

Refined by nature over a billion years, photosynthesis has given life to the planet, providing an environment suitable for the smallest, most primitive organism all the way to our own species.

While scientists have been studying and mimicking the natural phenomenon in the laboratory for years, understanding how to replicate the chemical process behind it has largely remained a mystery — until now.

Recent experiments at the U.S. Department of Energy’s Argonne National Laboratory have afforded researchers a greater understanding of how to manipulate photosynthesis, putting humankind one step closer to harvesting “solar fuel,” a clean energy source that could one day help replace coal and natural gas.

Lisa M. Utschig, a bioinorganic chemist at Argonne for 20 years, said storing solar energy in chemical bonds such as those found in hydrogen can provide a robust and renewable energy source. Burning hydrogen as fuel creates no pollutants, making it much less harmful to the environment than common fossil fuel sources.

Argonne National Laboratory:
Making fuel from light: Argonne research sheds light on photosynthesis and creation of solar fuel, Jo Napolitano

Thursday, March 26, 2015

See-Through Solar...

New York City Skyscrapers as Seen Through High-Performance SolarWindow™ Module
Topics: Alternative Energy, Green Energy, STEM, Solar Power, Materials Science

Science TIME: It’s called SolarWindow, and it involves spraying clear windows with transparent, electricity-generating coatings. The breakthrough, according to developers New Energy Technologies Inc., comes because previously “the collection of electricity was possible only through use of a metal contact, which blocked visibility and limited transparency.” The coatings use the world’s smallest functional solar cells, which measure less than a quarter the size of a grain of rice.

W-I-I-T-F-M -- What this means for you:

  • Your smart phone charging from its face in a matter of minutes in the sunlight.
  • Office buildings generating and storing their own power, greatly reducing the cost of operation.
  • Ditto for your homes and thus, your heating and cooling expenses.
  • Your electric car, bus, train or plane could be self-sustaining.
  • It would make camping out in the woods rather interesting indeed.
What's exciting is reducing what has become a ubiquitous term: carbon footprint. Even if you're not a tree-hugging member of Greenpeace, I've never seen an instance where anyone went to war over sunlight.

Company Site: SolarWindow
Bloomberg: See-Through Solar Is Tomorrow’s Threat to Oil
JD Markman:
Why solar eclipsing oil may first cause a year-long crash, then a 17-year bull market

Wednesday, March 11, 2015

In 180 Days...

Topics: Aeronautical Engineering, Flight, Green Energy, Green Tech, Solar Power

A pioneering flight around the world will use nothing but sunshine for fuel. In the dusty peach dawn of a desert day, the Solar Impulse 2 airplane took flight at 11:12 PM Eastern time on March 8 from Abu Dhabi on the first leg of a bid to fly around the world exclusively powered by electricity generated from sunlight.
The primary structural component is carbon-fiber sheets that weigh just 25 grams per square meter, or roughly three times lighter than a similar sized piece of paper. That carbon fiber is used sparingly in structural spots where forces push on the airplane. But the interior of the wings, the fuselage and other areas are empty to save even that tiny bit of weight, co-pilot Bertrand Piccard explained to Scientific American.


Atop those wings, as well as the body and even the tail of the plane, are 17,248 solar cells as thin as a human hair that generate electricity as the plane flies, some of which is stored in four lithium polymer batteries. Those batteries take over powering the plane’s four electric motors at night, which spin the two propellers under each wing. All told the plane weighs 2,300 kilograms and the four batteries are the heaviest passengers, weighing in at 633 kilograms. Making the plane required 12 years of calculations, computer simulations, building and testing, according to Piccard, and some $140 million.

Scientific American:
Solar Plane Takes Flight to Circle Globe in 180 Days [in Photos], David Biello
Site: Solar Impulse
You Tube: Solar Impulse Channel

Tuesday, January 13, 2015

Colloidal Quantum Dots and Solar...

PbS/Cd3P2 quantum heterojunction colloidal quantum dot solar cells. Source: Link Below

PbS = lead sulfide, Cd3P2 = cadmium phosphide

Colloidal quantum dots (CQDs) provide a tunable bandgap via the quantum size effect. They are solution-synthesized and -processed semiconductor nanocrystals. They are very attractive for application in low-cost, high-efficiency solar cells capable of harvesting the broad solar spectrum beyond the Shockley-Queisser limit. This is a result of the tandem or multi-junction strategy and their promise in multiple exciton generation. Reporting in Nanotechnology, researchers demonstrate quantum heterojunction CQD solar cells and explore the versatility of the concept.

Researchers from Huazhong University of Science and Technology, and Soochow University in China synthesize well crystallized and nearly monodisperse tetragonal Cd3P2 CQDs. They demonstrate the quantum heterojunction solar cells employing the PbS CQDs/Cd3P2 CQDs architecture. Here, both the p-type PbS and n-type Cd3P2 CQD layers are quantum-tunable and solution-processed light absorbers.

Nanotechweb.org: Colloidal quantum dots: solar applications

#P4TC: Related articles on quantum dots

Tuesday, August 19, 2014

Carbon Inside...

The structure of the carbon nanomaterials employed, where the diameter of the semiconducting SWCNTs is in the 0.8–1.2 nm range. (Courtesy: Nano Lett.)
A new solar cell made from carbon nanotubes (CNTs) that is twice as good at converting sunlight into power than the best previous such cells has been unveiled by a team of researchers in the US. The National Renewable Energy Laboratory (NREL) has already independently certified the performance of the device – a first for a CNT-based solar cell.

Thin-film photovoltaic materials are better than conventional solar-cell materials (such as silicon) because they are lighter, more flexible and cheaper to make. They work by absorbing photons from sunlight and converting these into electron–hole pairs (or excitons). To generate electric current, an electron and hole must be rapidly separated before the two particles have a chance to come back together and be reabsorbed into the material. In solar cells, the exciton must quickly travel to another layer in the device (where the charge separation will occur) for the best light-absorption efficiencies.

Single-walled carbon nanotubes (SWCNTs) are ideal as thin-film photovoltaics because they absorb light across a wide range of wavelengths from the visible to the near-infrared and possess charge carriers (electrons and holes) that move quickly. However, most thin-film cells containing SWCNTs have so far suffered from limited current and voltage, and therefore poor power-conversion efficiencies.

Physics World: Making better solar cells with polychiral carbon nanotubes

Monday, May 26, 2014

Solar Roadways...

...IF we're smart enough to actually do it!

If other countries followed our lead, the number one reason for conflict - resources - would be reduced significantly. We'd have to resort to actually solving real-world problems via cooperation, and might just make a buck and a life in the process.

A small US-based company called Solar Roadways are developing a solar road surface that, if installed nationwide, has the potential to produce more renewable energy than the entire country uses. In fact, they’ve actually already developed a working prototype that’s been installed in a parking lot, and they’re now crowdsourcing funds in order to tweak the design and move towards production.

Solar Roadways, which was started by Scott and Julie Brusaw in 2006, designed and developed hexagonal glass solar panels studded with LED lights that could be installed on a variety of surfaces such as roads, pavements and playgrounds. These panels would more than pay for themselves and would benefit both businesses and homeowners as the energy generated from driveways and parking lots could be used to power buildings, and any excess can be sold back to the grid.

The panels also contain heating elements to melt ice and snow so are ideal in winter conditions, and LEDs to make road lines and signs which have been previously shown to reduce night time accidents. The surface could also be used to charge electric vehicles as oppose to fossil fuels, and future technology could even allow for charging whilst driving via mutual induction panels. Amazingly, the team also found that car headlights can produce energy in the panels, so cars driving around at night would be producing some electricity.


Read more at http://www.iflscience.com/technology/solar-roads-could-power-entire-country#feX48VfbL4mvYe5C.99, Justine Alford

Friday, March 29, 2013

Swiss Army Metamaterial...

Assoc Prof Darren Sun holding the patented Titanium dioxide nanofibre in a test tube and the hydrogen reactor in the background. (Credit: Image courtesy of Nanyang Technological University)
Science fiction? Hardly, and there's more -- It can also desalinate water, be used as flexible water filtration membranes, help recover energy from desalination waste brine, be made into flexible solar cells and can also double the lifespan of lithium ion batteries. With its superior bacteria-killing capabilities, it can also be used to develop a new type of antibacterial bandage.

Scientists at Nanyang Technological University (NTU) in Singapore, led by Associate Professor Darren Sun have succeeded in developing a single, revolutionary nanomaterial that can do all the above and at very low cost compared to existing technology.

This breakthrough which has taken Prof Sun five years to develop is dubbed the Multi-use Titanium Dioxide (TiO2). It is formed by turning titanium dioxide crystals into patented nanofibres, which can then be easily fabricated into patented flexible filter membranes which include a combination of carbon, copper, zinc or tin, depending on the specific end product needed.

Science Daily:
Multi-Purpose Wonder Can Generate Hydrogen, Produce Clean Water and Even Provide Energy