Brainy Quote of the Day

Showing posts with label Optical Physics. Show all posts
Showing posts with label Optical Physics. Show all posts

Wednesday, September 25, 2019

Second Harmonic Microscopy...

Fig. 1 Typical geometry for the SH microscopy investigation of poled x-cut LNOI.

Topics: Applied Physics, Optical Physics, Thin Films

Abstract
Thin film lithium niobate has been of great interest recently, and an understanding of periodically poled thin films is crucial for both fundamental physics and device developments. Second-harmonic (SH) microscopy allows for the noninvasive visualization and analysis of ferroelectric domain structures and walls. While the technique is well understood in bulk lithium niobate, SH microscopy in thin films is largely influenced by interfacial reflections and resonant enhancements, which depend on film thicknesses and substrate materials. We present a comprehensive analysis of SH microscopy in x-cut lithium niobate thin films, based on a full three-dimensional focus calculation and accounting for interface reflections. We show that the dominant signal in backreflection originates from a copropagating phase-matched process observed through reflections, rather than direct detection of the counterpropagating signal as in bulk samples. We simulate the SH signatures of domain structures by a simple model of the domain wall as an extensionless transition from a −χ(2) to a +χ(2) region. This allows us to explain the main observation of domain structures in the thin-film geometry, and, in particular, we show that the SH signal from thin poled films allows to unambiguously distinguish areas, which are completely or only partly inverted in depth.

Second harmonic microscopy of poled x-cut thin film lithium niobate: Understanding the contrast mechanism
Journal of Applied Physics 126, 114105 (2019); https://doi.org/10.1063/1.5113727

Tuesday, August 20, 2019

Lamina Tenuissima...

Illustration of a tungsten disulfide monolayer suspended in air and patterned with a square array of nanoholes. Upon laser excitation, the monolayer emits photoluminescence. A portion of this light couples into the monolayer and is guided along the material. At the nanohole array, periodic modulation in the refractive index causes a small portion of the light to decay out of the plane of the material, allowing the light to be observed as guided mode resonance. Courtesy: E Cubukcu, UCSD

Note: lamina tenuissima = thinnest (Latin)

Topics: Applied Physics, Nanotechnology, Optical Physics, Photonics

Researchers have succeeded in making the thinnest ever optical device in the form of a waveguide just three atomic layers thick. The device could lead to the development of higher density optoelectronic chips.

Optical waveguides are crucial components in data communication technologies but scaling them down to the nanoscale has proved to be no easy task, despite important advances in nano-optics and nanomaterials. Indeed, the thinnest waveguide used in commercial applications today is hundreds of nanometres thick and researchers are studying nanowire waveguides down to 50 nm in the laboratory.

“We have now pushed this limit down to just three atoms thick,” says Ertugrul Cubukcu of the University of California at San Diego, who led this new research effort. “Such a thin waveguide, which is at the ultimate limit for how thin an optical waveguide can be built, might potentially lead to a higher density of waveguides or optical elements on an optoelectronic chip – in the same way that ever smaller transistors have led to a higher density of these devices on an electronic chip.”

Cubukcu and colleagues’ waveguide is just six angstroms thick. This makes it 104 times thinner than a typical optical fiber and about 500 times thinner than on-chip optical waveguides in integrated photonic circuits.

Three-atom-thick optical waveguide is the thinnest ever, Belle Dumé, Physics World

Monday, January 14, 2019

3D Topological Insulators...

Courtesy: H. Chen
Topics: Laser, Optical Physics, Photonics, Materials Science, Nanotechnology, Quantum Mechanics

Reference: Topological Insulators, then the rest of the post.

Researchers in China and Singapore say they have made the first ever 3D photonic topological insulator using a stack of thin plastic sheets embedded with metal nanoantennas. The insulator works at microwave frequencies, but if extended to terahertz or optical wavelengths, it could find use in applications such as high-power lasers, optical diodes and photonic computer chips.

2D topological insulators, also known as 2D quantum spin Hall insulators, are materials that are electrical insulators in the bulk but can conduct electricity extremely well on their edge via special, topologically protected, electronic states. Electrons can only travel in one direction along these states and do not backscatter. This means that they can carry electrical current with near-zero dissipation of energy and so could be used to make energy-efficient electronic devices in the future.

Structures made from photonic crystals
In recent years, researchers have started looking at making topological insulators that work using light rather than electric currents. These structures are made from photonic crystals – materials in which the periodic variation of the refractive index means that only certain wavelengths of light are able to pass through. One of the advantages of these photonic topological insulators is that they can operate at room temperature, unlike their electronic counterparts.

Another is that the space through which photons can travel can be engineered so that it is curved like the surface of a cone. These structures thus mimic a 2D quantum spin Hall insulator that naturally contains so-called surface Dirac cones. These are the sharp single points in a 2D material at which the valence and the conduction bands meet at the Fermi level, and at which electrons behave as though they are relativistic particles with no rest mass.

3D topological insulators go photonic, Belle Dumé, Physics World

Wednesday, August 29, 2018

Evidence of Things Unseen...

Schematic illustration of charge carriers confined within a TMD flake comprising different thicknesses. Charge carriers in the ground state (blue) can be excited upon resonant light excitation to a higher state (pink). Credit: ICFO/Fabien Vialla
Topics: Laser, Nanotechnology, Optical Physics, Quantum Mechanics, Semiconductor Technology

All deference to the Apostle Paul. It seemed an apropos title to the post.

Semiconducting heterostructures are key to the development of electronics and opto-electronics. Many applications in the infrared and terahertz frequency range exploit transitions, called intersubband transitions, between quantized states in semiconductor quantum wells. These intraband transitions exhibit very large oscillator strengths, close to unity. Their discovery in III-V semiconductor heterostructures depicted a huge impact within the condensed matter physics community and triggered the development of quantum well infrared photodetectors as well as quantum cascade lasers.

Quantum wells of the highest quality are typically fabricated by molecular beam epitaxy (sequential growth of crystalline layers), which is a well-established technique. However, it poses two major limitations: Lattice-matching is required, restricting the freedom in materials to choose from, and the thermal growth causes atomic diffusion and increases interface roughness.

2-D materials can overcome these limitations since they naturally form a quantum well with atomically sharp interfaces. They provide defect-free and atomically sharp interfaces, enabling the formation of ideal QWs, free of diffusive inhomogeneities. They do not require epitaxial growth on a matching substrate and can therefore be easily isolated and coupled to other electronic systems such as Si CMOS or optical systems such as cavities and waveguides.

Surprisingly enough, intersubband transitions in few-layer 2-D materials had never been studied before, neither experimentally nor theoretically. Thus, in a recent study published in Nature Nanotechnology, ICFO researchers Peter Schmidt, Fabien Vialla, Mathieu Massicotte, Klaas-Jan Tielrooij, Gabriele Navickaite, led by ICREA Prof at ICFO Frank Koppens, in collaboration with the Institut Lumière Matière—CNRS, Technical University of Denmark, Max Planck Institute for the Structure and Dynamics of Matter, CIC nanoGUNE, and the National Graphene Institute, report on the first theoretical calculations and first experimental observation of inter-sub-band transitions in quantum wells of few-layer semiconducting 2-D materials (TMDs).

Nano-imaging of intersubband transitions in few-layer 2-D materials, Phys dot org

More information: Peter Schmidt et al. Nano-imaging of intersubband transitions in van der Waals quantum wells, Nature Nanotechnology (2018). DOI: 10.1038/s41565-018-0233-9

Monday, July 9, 2018

Slow-Mo Electrons...

Electrons in some oxides can experience an “unconventional slowing down” of their response to a light pulse, according to Argonne material scientists and their collaborators. This surprising behavior may result in useful properties related to magnetism, conductivity or even superconductivity. (Image by Argonne National Laboratory.)
Topics: Chemistry, Optical Physics, Periodic Table

In a new study, researchers from the U.S. Department of Energy’s (DOE) Argonne National Laboratory have determined that electrons in some oxides can experience an “unconventional slowing down” of their response to a light pulse.

The researchers describe the behavior as lasting about a millionth of a second, which is still a million times slower than traditional electronic recovery times.

“It’s as if the electron is spending two years or more dithering between states when normally it could make up its mind in a minute,” said Anand Bhattacharya, an Argonne materials scientist and co-author of the study, published May 4, in Nature Communications.

In a crystal, all the atoms form a periodic structure called a lattice, where the atoms are arranged in a repetitive pattern in three dimensions. The properties of electrons living in this space typically obey the same periodicity.

But below a temperature of about minus 100 degrees Fahrenheit, the electrons in the study material, lanthanum strontium ferrite, find it more energetically advantageous to cooperate with the lattice and magnetism on the iron atoms, to form a new periodic structure called a magnetically driven, charge-ordered state.

The behavior occurs close to a temperature that marks a phase transition — similar to the way in which 32 degrees Fahrenheit marks the phase transition from water to ice. But the phase transition studied here is peculiar because it marks a transition between a magnetic insulator and a non-magnetic metal. According to Bhattacharya, these sorts of phase transitions are potentially useful as 'switches,' where a material’s 'on' and 'off' states can allow us to toggle between metals, insulators, magnets and superconductors.

However, the material studied — known as La1/3Sr2/3FeO3 — had a surprise in store.

Electrons slowing down at critical moments, Jared Sagoff, Argonne National Laboratory

Wednesday, May 16, 2018

58 Years to the Blue Ray...

Bright prospect: the first International Day of Light will be celebrated on 16 May. (Courtesy: iStock/RichLegg)

Topics: Applied Physics, Laser, Optical Physics, Photonics

This month sees the first International Day of Light. Wednesday 16 May was chosen because it is the anniversary of the first successful operation of the laser, as demonstrated by the American engineer and physicist Ted Maiman in 1960.

It’s a good choice, because the laser is a perfect example of how a scientific discovery can yield revolutionary benefits to society in all sorts of areas, including communications, healthcare and manufacturing. However, when I read the words “first successful operation of the laser” on the International Day of Light website (lightday.org), I had to look further, as it sounded like there might be more to the story.

I have spent most of my career working in photonics, optical communications and lighting, so I was already somewhat familiar with the laser’s history. However, the details still interested me. It turns out that although Maiman did indeed demonstrate the first working laser on 16 May 1960, he is not the only person with a reasonable claim to have “invented” the laser. The other is Gordon Gould, another US physicist who described “Some rough calculations on the feasibility of a LASER: Light Amplification by Stimulated Emission of Radiation” in his lab notebook in November 1957.

A day of light, James McKenzie, Physics World

Wednesday, April 25, 2018

One out of Two...

Collision course: two atoms held in optical tweezers before forming a molecule
(Courtesy: Lee Liu and Yu Liu)

Topics: Chemistry, Laser, Optical Physics, Optical Tweezers, Particle Physics

A single molecule has been created by combining individual atoms of sodium and caesium, using optical tweezers to guide them into place. The technique, devised by Lee Liu and colleagues at Harvard University and Harvard-MIT Health Sciences and Technology, could help chemists to study chemical reactions far more precisely by giving them control over the individual atomic and molecular collisions. The team hopes that their method will be used in a variety of fields to create diverse, complex molecules, allowing for discoveries of previously unforeseen molecular properties.

Conventional studies of chemical reactions involve observing the macroscopic results of large numbers of collisions of atoms and molecules – rather than studying individual collisions. Currently, chemists need to compare experimental reaction rates with theoretical models to calculate the probabilities of individual collisions taking place – a process that is fundamental to the understanding of chemistry. An alternative, and more precise, technique is to study interactions between individual atoms and molecules – something that requires great experimental dexterity.

To begin their interaction process, Liu and colleagues use magneto-optical traps to prepare reservoirs of stationary atoms of sodium and caesium at just a few hundred microkelvin. “Cooling and controlling atoms and molecules to temperatures where they are standing still allows for easier manipulations of their properties, interactions and reactions,” explains team leader Kang-Kuen Ni.

Optical tweezers create a single molecule from two atoms, Sam Jarman, Physics World

Wednesday, April 11, 2018

Cephalopod IR...

Warning signs: the greater blue-ringed octopus changes its appearance when threatened using techniques that have inspired an adaptive infrared reflector. (CC BY-SA 2.5/Jens Petersen)

Topics: Bioengineering, Biology, Optical Physics, Materials Science, Nanotechnology

A simple device with tuneable infrared reflectivity has been made by mimicking the adaptive properties of the skin of octopuses and related animals. Chengyi Xuat, Alon Gorodetsky and George Stiubianu of the University of California, Irvine created the device using a dielectric elastomer and say that it overcomes many of the limitations of previous adaptive infrared-reflecting systems.

Reflecting infrared radiation is important for many technologies, ranging from building insulation to spacecraft components. But most of the materials used to reflect radiation in the infrared region are static: they are unable to respond and adapt to changes in the environment. Some adaptable infrared-reflecting systems have been developed, but they tend to be complex and difficult to control, while also lacking spectral tunability and requiring high operating temperatures.

Inspired by the skin of cephalopods – squid, octopuses, and cuttlefish – Gorodetsky and colleagues have now developed an adaptable infrared-reflecting system that they say is easy to control, can respond rapidly and be used repeatedly. The system also has a tuneable spectral range and works at low temperatures.

Many cephalopods can rapidly change the colour and patterning of their skin. This is done for both camouflage and signalling, and is enabled by pigment cells with adjustable spectral properties that can response within hundreds of milliseconds. These yellow, red, and brown cells, known as adaptive chromatophores, are packed with pigment granules and can be expanded and contracted by radial muscles. As their size and shape changes so do the wavelengths of light that they absorb and reflect.

Octopus skin inspires new infrared reflector, Michael Allen, Physics World

Tuesday, January 30, 2018

Nano Magnets and Light...

Minjeong Cha, an author of the research article, holds up a sample of the gel infused with chiromagnetic nanoparticles. Photo: Joseph Xu, Michigan Engineering, Communications & Marketing.

Topics: Electromagnetism, Optical Physics, Nanotechnology

Magnetic nanoparticles with chiral distortions in their crystal lattice provide an unprecedented degree of control over circularly polarized light. The effect, which was demonstrated by the nanoparticles embedded in a transparent gel and exposed to a magnetic field, can be understood thanks to careful consideration of the magnetic field of the photons, in addition to the familiar electric field.

Where magnetism and chirality (a lack of mirror symmetry) overlap there are often intriguing discoveries. These two concepts are fundamental to the advancement of spintronics, chiral catalysis and magneto-optics. Much of the research in this field aims to enhance the interaction between electrons in matter and the (often ignored) magnetic field of a photon.

A recent and very successful example of such an attempt is the work from Nicholas Kotov and collaborators in the University of Michigan, USA, and the Federal University of São Carlos, Brazil. The researchers created a material comprised of magnetic nanoparticles (NPs) with a chiral or twisted crystal structure encased in a transparent gel. This chiromagnetic gel responds to circularly polarized light with a sensitivity 10 times greater than previously observed in similar non-magnetic composites.

Distorted nano-magnets for agile polarization control
Lauren Barr is a PhD student contributor to nanotechweb.org.

Thursday, January 25, 2018

R2D2 Redo...

The image on the left shows the apparatus and the 3D image of a man. The trapping and illumination light emerges from the lens at the left of the man. The image on the right is a close-up of the 3D image of the man. (Courtesy: D E Smalley et al/Nature)

Topics: Holograms, Optical Physics, Science Fiction, Star Wars

A technique to create multi-coloured 3D images that can share space with physical objects has been developed by researchers in the US. The work is at an early stage, but it offers several potential advantages over currently available techniques for creating 3D images such as holography.

The technology used by the android R2D2 to project the 3D video footage of Princess Leia pleading "Help me, Obi-Wan Kenobi: you're my only hope" into thin air was never explained in the film Star Wars. Scientists, however, have invented several technologies capable of producing the impression of 3D images. The best known, and most widely used is holography, in which a 2D surface sends light to the eye in such a way that the brain reconstructs this light as having come from a 3D object. Unfortunately, this optical illusion only works for a fairly narrow range of viewing angles: "Holograms and displays like them are based on 2D modulating surfaces that have to be looked at like a TV screen," explains Daniel Smalley of Brigham Young University in Utah, "You always have to be looking into the screen to see it."

In a volumetric display, however, the light originates from where your eye sees the image. Such displays have several advantages over holograms. As the image does not rely on an optical illusion, for example, it is unaffected by the viewing angle. "You can be lying flat on the ground and you can see what's coming up out of the display," says Smalley. Furthermore, it is (at least in principle) possible to wrap the image around the viewer or another physical object.

Display creates 3D images that can be viewed from many angles, Tim Wogan, Physics World

Thursday, November 9, 2017

FAST Entanglement...

While quantum entanglement usually spreads through the atoms in an optical lattice via short-range interactions with the atoms' immediate neighbors (left), new theoretical research shows that taking advantage of long-range dipolar interactions among the atoms could enable it to spread more quickly (right), a potential advantage for quantum computing and sensing applications.
Credit: Gorshkov and Hanacek/NIST

Topics: Laser, Materials Science, Optical Physics, Quantum Mechanics

“It is these long-range dipolar interactions in 3-D that enable you to create entanglement much faster than in systems with short-range interactions,” said Gorshkov, a theoretical physicist at NIST and at both the Joint Center for Quantum Information and Computer Science and the Joint Quantum Institute, which are collaborations between NIST and the University of Maryland. “Obviously, if you can throw stuff directly at people who are far away, you can spread the objects faster.”

Applying the technique would center around adjusting the timing of laser light pulses, turning the lasers on and off in particular patterns and rhythms to quick-change the suspended atoms into a coherent entangled system.

The approach also could find application in sensors, which might exploit entanglement to achieve far greater sensitivity than classical systems can. While entanglement-enhanced quantum sensing is a young field, it might allow for high-resolution scanning of tiny objects, such as distinguishing slight temperature differences among parts of an individual living cell or performing magnetic imaging of its interior.

Gorshkov said the method builds on two studies from the 1990s in which different NIST researchers considered the possibility of using a large number of tiny objects—such as a group of atom—as sensors. Atoms could measure the properties of a nearby magnetic field, for example, because the field would change their electrons’ energy levels. These earlier efforts showed that the uncertainty in these measurements would be advantageously lower if the atoms were all entangled, rather than merely a bunch of independent objects that happened to be near one another.

Need Entangled Atoms? Get 'Em FAST! With NIST’s New Patent-Pending Method

Paper: Z. Eldredge, Z.-X. Gong, J. T. Young, A.H. Moosavian, M. Foss-Feig and A.V. Gorshkov. Fast State Transfer and Entanglement Renormalization Using Long-Range Interactions. Physical Review Letters. Published 25 October 2017. DOI: 10.1103/PhysRevLett.119.170503

Wednesday, September 27, 2017

Nano Mirror...

Credit: Joshua Edel

Topics: Optical Physics, Nanotechnology, Quantum Mechanics

Note: My study group is preparing for midterms next week. I give my apologies for what will be an erratic posting schedule. I'm merging two colloquialisms: drinking from fire hoses and eating elephants one bite at a time. I should resume posting normalcy - as far as grad school goes - the 9th of October, until finals week in December.

From last Friday's posting, it's obvious what I thought of the (lack of) humanity pursuing the deaths of millions to give tax cuts for the few. I'm glad for the moment the Affordable Care Act hasn't met the zombie apocalypse. I have no doubt like the pertinacious walking dead, they will try again.

Surface plasmons—collective, light-driven oscillations of electrons in metal—have given us stained glass, flat lenses, and home pregnancy tests. Now they bring us the mirror–window, a liquid mirror whose reflectivity can be tuned, or eliminated altogether, with an applied voltage.

Developed by researchers led by Alexei Kornyshev, Anthony Kucernak, and Joshua Edel at Imperial College London, the device makes use of gold nanoparticles inside a cell filled with two immiscible electrolyte solutions—one aqueous, the other oily. Dispersed throughout one phase or the other, the nanoparticles interact negligibly with light, and the cell is transparent. But when the particles form a dense monolayer at the liquid–liquid interface, their plasmon resonances couple to each other and they become optically reflective.


Now you see this nanoplasmonic mirror. Now you don’t.
A tunable assembly of gold nanoparticles can go from reflective to transparent with the flip of a switch.
Ashley G. Smart, Physics Today

Tuesday, August 29, 2017

Diabolo...

Image Source: Link below
Topics: Geometry, Mathematics, Optical Physics

A ring-shaped optical cavity has degenerate resonant modes, because clockwise and anticlockwise waves resonate at the same frequencies. The degeneracy can be lifted, and the frequencies split, by a perturbation such as a physical rotation or the presence of a molecule or nanoparticle. Typically, the frequency splitting is proportional to the perturbation’s magnitude, as illustrated in the top panel of the figure for a hypothetical complex-valued perturbation ε (that is, one that can affect both the light’s frequency and its phase). Because the plot’s shape resembles a yo-yo-like toy called a diabolo, the degeneracy has been dubbed a diabolic point. The mode splitting around a diabolic point is the basis for optical gyroscopes, and it’s been explored for other sensing applications.

There’s another type of degeneracy, called an exceptional point, where not only do resonant frequencies coincide but their resonant modes do too. In the case of the ring resonator, inserting reflectors to scatter light from the anticlockwise mode into the clockwise mode (but not vice versa) creates an exceptional point with a single resonant mode, the clockwise-traveling wave. Perturbing the system splits that mode into two resonances, each with a small admixture of the anticlockwise wave, and the frequency splitting scales with the square root of the perturbation magnitude, as shown in the bottom panel.

Exceptional points make for exceptional sensors
At just the right locations in parameter space, resonant frequencies are ultrasensitive to tiny changes.
Johanna L. Miller, Physics Today

Monday, August 7, 2017

Nanotomography...

A vertical slice of the internal magnetic structure of a sample section. The sample is 0.005 millimetres (5 microns) in diameter and the section shown here is 0.0036 millimetres (3.6 microns) high. The internal magnetic structure is represented by arrows for a vertical slice within it. In addition, the colour of the arrows indicates whether they are pointing towards (orange) or away from the viewer (purple). Graphics and text: Paul Scherrer Institute/Claire Donnelly
Topics: Atomic Force Microscopy, Atomic Physics, Electromagnetism, Optical Physics, Nanotechnology

Thanks to a technique called hard X-ray magnetic tomography, researchers at the Paul Scherrer Institute (PSI) in Switzerland, the ETH Zurich and the University of Glasgow have succeeded in imaging the magnetization in 3D bulk-like magnets and observe features down to just 100 nm. In particular, they have observed structures known as Bloch points, which were predicted theoretically more than 50 years ago but never actually seen in an experiment until now. The new work could help us better understand the relationship between the magnetic structure and the behaviour and performance of bulk magnets, and so improve the everyday applications in which they are employed.

“Although it was possible to image the arrangement of magnetic moments in 3D before now in films of up to around 200 nm thick using soft X-rays and electrons, it was not possible to study the internal micromagnetic structure of larger, bulk, systems,” explains team member Claire Donnelly of the PSI. “In general, it is not possible to slice down a magnet to investigate its structure because the magnetic configuration will change accordingly. Scientists have tried to overcome this problem in the past using neutron magnetic imaging, but they were only able to achieve a spatial resolution of tens to hundreds of microns using this approach.

“In our new work, we are able to study the internal magnetization within a micron-sized system with 100 nm spatial resolution and observe micromagnetic details within the bulk for the first time.”

The researchers, led by Laura Heyderman, imaged the internal magnetic structure of a micron-sized pillar made of the magnetic material gadolinium-cobalt using hard X-ray magnetic tomography, a technique developed at PSI during the course of this study. “We had to make a number of advances in developing this method,” explains Donnelly. ‘First, we developed hard X-ray magnetic imaging with nanoscale magnetic resolution (this work was published last year). Hard X-rays have a much higher energy than soft X-rays and thus a much larger penetration depth, which allows us to study thicker samples with high spatial resolution.

X-ray nanotomography reveals 3D magnetization structures, Belle Dumé, Nanotechweb.org

Tuesday, August 1, 2017

Photoresist-Free...

A true-colour image containing around 8 × 105 RGB subpixels directly photopatterned using Cs2N3– capped quantum dots. Scale bar, 5 mm. Courtesy: D Talapin
Topics: Applied Physics,  Nanotechnology, Optical Physics, Semiconductor Technology, Quantum Dots, Quantum Mechanics

Photolithography is an important manufacturing process widely used in the semiconductor industry that employs photoresists (usually made from polymers) whose solubility change when illuminated with ultraviolet light. Although it is precise and can generate patterns with nanoscale resolution, it is limited in that it cannot easily pattern nanomaterials such as quantum dots (which are increasingly being used in flat-panel displays, for example). A new photoresist-free technique, developed by researchers at the University of Chicago and the Argonne National Laboratory, both in Illinois in the US, could help overcome this problem.

“Our new technique, dubbed DOLFIN (for Direct Optical Lithography of Functional Inorganic Nanomaterials) can be used to optically pattern a variety of inorganic materials, including metals, semiconductors, catalysts and magnetic materials without using photoresists,” explains team leader Dmitri Talapin. “No residual polymer-based impurities are present in the patterned layers, which means that they have good electronic and optical properties. Indeed, their conductivity, carrier mobility, dielectric and luminescence properties are on a par with those of state-of-the-art solution-processed materials.”

DOLFIN involves first preparing patternable materials in the form of nanoparticles with the desired size and shape. Next, the surface of these nanoparticles is decorated with special molecules designed to decompose when they are illuminated with UV light.

Optical lithography goes photoresist-free, Belle Dumé, Nanotechweb.org

Wednesday, July 19, 2017

INFO...

This image shows the NIST logo made from glowing nanowire LEDs. While the color of the nanowires in the image looks blue, they are actually emitting in the ultraviolet with a wavelength of approximately 380 nm. The other two images, from a scanning electron microscope, show the overall structure of the nanowires.
Topics: Atomic Force Microscopy, LEDs, Nanotechnology, Optical Physics

One of the persistent challenges in 21st century metrology is the need to measure ever-more-detailed properties of ever-smaller things, from microchip features to subcomponents of biological cells. That’s why, four years ago, a team of NIST scientists patented (link is external) the design for a nanoscale probe system that can simultaneously measure the shape, electrical characteristics, and optical response of sample regions a few tens of nanometers (nm, billionths of a meter) wide. 100 nm is about one-thousandth the width of a human hair.

Now the researchers from NIST’s Physical Measurement Laboratory are closing in on a working prototype. The newest version of the device, which has a probe tip that functions as an ultra-tiny LED “spotlight,” holds great promise for identifying cancer-prone tissue, testing materials for improved solar cells, and providing a new way to put circuits on microchips, among other uses.

The Integrated Near-Field Optoelectronic (INFO) system has the general configuration of an atomic force microscope (AFM), in which a probe tip on the end of a tiny cantilever beam passes a few nanometers over the surface of a sample, recording exact details of its morphology. But the metal-plated INFO probe also serves as a transmitter that projects microwaves into the sample as well as a receiving antenna that detects the altered microwaves coming back out. The nature of that alteration reveals electrical and chemical properties of the material.

Sub-microscopic LEDs Shed New Light on Advanced Materials, Ben Stein, NIST

Friday, May 26, 2017

Ultra Cold and Fermi-Hubbard...

Raw fermionic microscope image (left) and processed image showing that spin-up atoms occupy alternating lattice sites as expected in an antiferromagnet. The spin-down atoms have been removed from the image. (Courtesy: A Mazurenko et al. / Nature)

Topics: Condensed Matter Physics, Optical Physics, Quantum Mechanics, Solid State Physics, Superconductors

New insights into a popular and potentially useful model of how electrons behave in solids have been provided by an experiment involving ultracold atoms. Markus Greiner and colleagues at Harvard University in the US studied the behaviour of lithium-6 atoms that are held in an optical lattice and interact according to rules set out by the Fermi-Hubbard model.

They found that the system becomes magnetic at low temperatures – and that the magnetism disappears when the density of atoms is reduced. The team can now use its atomic simulator to explore regimes of the Fermi-Hubbard model that could harbour very interesting physics including high-temperature superconductivity.

The electronic properties of solid materials arise from quantum-mechanical interactions between large numbers of electrons. It is notoriously difficult to calculate these properties, so physicists rely on simple models to simplify the mathematics – but even models have significant computational challenges. One such scheme is the Fermi-Hubbard model, which represents electrons as Fermi–Dirac particles (fermions) that hop between fixed sites on a lattice and only interact with each other when they occupy the same lattice site.

Physics World: Ultracold atoms shed light on the Fermi-Hubbard model
Hamish Johnston

Wednesday, April 12, 2017

Abracadabra...

Figure 1: Scheme of the setup used by Jennewein and co-workers [1]. A pump laser generates a three-photon entangled state through a cascade of frequency conversion processes in a nonlinear crystal. The oscillations in the rate of three-photon coincidence measured by the detectors provide the signature of genuine three-photon interference.
Topics: Applied Physics, Optical Physics, Photonics, Quantum Mechanics

Quantum interference effects lie at the heart of technologies that promise radically new capabilities for sensors, secure communications, and computing. Most existing experiments and applications rely on one photon interfering with itself, or two photons interfering with each other. However, the interference of a larger number of particles leads to a richer variety of phenomena, and may enable more sophisticated applications. Now, two independent groups, the first led by Thomas Jennewein at the University of Waterloo, in Canada [1], the second by Ian Walmsley at the University of Oxford, in the UK [2], have been able to isolate and observe, for the first time, “genuine” interference between three photons, that is, an effect deriving from the quantum interference of three photons that does not originate from two-photon or single-photon interference. The two studies provide new tools for controlling multiphoton interference, which may help researchers design new fundamental tests of quantum mechanics, quantum-communication protocols, and powerful quantum simulators.

The quintessential example of multiphoton quantum interference is the Hong-Ou-Mandel (HOM) effect, first observed in 1987. In an HOM experiment [3], two independent photons coming from different directions impinge on a 50:50 beam splitter. If the two incoming photons are distinguishable, the outgoing photons will split equally between the two exit ports of the splitter. However, if the two photons are identical and arrive simultaneously, the quantum-mechanical wave functions will interfere, and the two photons will always exit through the same port, even though each of them has an equal probability of exiting through both ports.

APS Physics Viewpoint: Photonic Hat Trick
Robert Sewell, The Institute of Photonic Sciences, Av. Carl Friedrich Gauss, 3, 08860 Castelldefels (Barcelona), Spain
April 10, 2017• Physics 10, 38

Friday, November 18, 2016

Mirror, Mirror...

Leonard Nimoy (R.I.P.) as mirror universe Spock, "Mirror, Mirror," Star Trek, S2, E4
Topics: Holograms, Optical Physics, Quantum Mechanics, Star Trek 😎

When you look in the mirror, the image you see looks a lot like you—not exactly the same, because when you raise your right hand, your mirror-self raises its left. What’s more, the mirror image is merely an assemblage of reflected light, without a physical body behind it. Despite these differences, you can see an important connection between you and your reflection.

This type of mirror relation is a familiar and powerful form of symmetry. We can say that a Valentine heart is symmetrical because the left side is a reflection of the right. But the symmetry of your mirror image is different and deeper. A heart is symmetrical because the left and right side happen to have a similar shape. The symmetry between you and your reflection is due to the laws of physics. The nature of light requires your reflection to be symmetrical to you. It is an example of a powerful and subtle type of symmetry known as duality.

The duality between particles and waves is a central part of quantum theory. Light is clearly a wave: It has a wavelength that determines its color, and light waves can interact with each other to produce things like lasers. Light is also clearly a particle: It interacts with atoms as discrete photons; a single photon can be deflected like a billiard ball. Particle-wave duality means that quantum objects like light have a symmetry between their particle and wave aspects. They are particles with wave properties and waves with particle properties. They are both, and they are neither. The power of quantum theory is that you don’t need to distinguish between particles and waves. They are simply quantum objects with a duality between their particle and wave natures.

Does that mean that the universe is a hologram? Not quite. It means there is a duality...

Nautilus: What It Means to Live in a Holographic Cosmos
Brian Koberlein is an astrophysicist and physics professor at Rochester Institute of Technology.

Tuesday, November 8, 2016

Lasers and Anti-Lasers...

Schematics above show light input (green) entering opposite ends of a single device. When the phase of light input 1 is faster than that of input 2 (left panel), the gain medium dominates, resulting in coherent amplification of the light, or a lasing mode. When the phase of light input 1 is slower than input 2 (right panel), the loss medium dominates, leading to coherent absorption of the input light beams, or an anti-lasing mode. Credit: Zi Jing Wong/UC Berkeley
Topics: Laser, Modern Physics, Optical Physics

Bringing opposing forces together in one place is as challenging as you would imagine it to be, but researchers in the field of optical science have done just that.

Scientists at the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) have for the first time created a single device that acts as both a laser and an anti-laser, and they demonstrated these two opposite functions at a frequency within the telecommunications band.

Their findings, reported in a paper to be published Monday, Nov. 7, in the journal Nature Photonics, lay the groundwork for developing a new type of integrated device with the flexibility to operate as a laser, an amplifier, a modulator, and an absorber or detector.

"In a single optical cavity we achieved both coherent light amplification and absorption at the same frequency, a counterintuitive phenomenon because these two states fundamentally contradict each other," said study principal investigator Xiang Zhang, senior faculty scientist at Berkeley Lab's Materials Sciences Division. "This is important for high-speed modulation of light pulses in optical communication."

Phys.org:
Lasers + anti-lasers: Marriage opens door to development of single device with exceptional range of optical capabilities