Brainy Quote of the Day

Showing posts with label Thin Films. Show all posts
Showing posts with label Thin Films. Show all posts

Wednesday, September 25, 2019

Second Harmonic Microscopy...

Fig. 1 Typical geometry for the SH microscopy investigation of poled x-cut LNOI.

Topics: Applied Physics, Optical Physics, Thin Films

Abstract
Thin film lithium niobate has been of great interest recently, and an understanding of periodically poled thin films is crucial for both fundamental physics and device developments. Second-harmonic (SH) microscopy allows for the noninvasive visualization and analysis of ferroelectric domain structures and walls. While the technique is well understood in bulk lithium niobate, SH microscopy in thin films is largely influenced by interfacial reflections and resonant enhancements, which depend on film thicknesses and substrate materials. We present a comprehensive analysis of SH microscopy in x-cut lithium niobate thin films, based on a full three-dimensional focus calculation and accounting for interface reflections. We show that the dominant signal in backreflection originates from a copropagating phase-matched process observed through reflections, rather than direct detection of the counterpropagating signal as in bulk samples. We simulate the SH signatures of domain structures by a simple model of the domain wall as an extensionless transition from a −χ(2) to a +χ(2) region. This allows us to explain the main observation of domain structures in the thin-film geometry, and, in particular, we show that the SH signal from thin poled films allows to unambiguously distinguish areas, which are completely or only partly inverted in depth.

Second harmonic microscopy of poled x-cut thin film lithium niobate: Understanding the contrast mechanism
Journal of Applied Physics 126, 114105 (2019); https://doi.org/10.1063/1.5113727

Thursday, May 23, 2019

Strain, 2-D and Superconductivity...

Superconductors' never-ending flow of electrical current could provide new options for energy storage and superefficient electrical transmission and generation. But the signature zero electrical resistance of superconductors is reached only below a certain critical temperature and is very expensive to achieve. Physicists in Serbia believe they've found a way to manipulate superthin, waferlike monolayers of superconductors, thus changing the material's properties to create new artificial materials for future devices. This image shows a liquid phase graphene film deposited on PET substrate. Credit: Graphene Laboratory, University of Belgrade

Topics: Applied Physics, Superconductors, Thin Films

Superconductors' never-ending flow of electrical current could provide new options for energy storage and superefficient electrical transmission and generation, to name just a few benefits. But the signature zero electrical resistance of superconductors is reached only below a certain critical temperature, hundreds of degrees Celsius below freezing, and is very expensive to achieve.

Physicists from the University of Belgrade in Serbia believe they've found a way to manipulate superthin, waferlike monolayers of superconductors, such as graphene, a monolayer of carbon, thus changing the material's properties to create new artificial materials for future devices. The findings from the group's theoretical calculations and experimental approaches are published in the Journal of Applied Physics.

"The application of tensile biaxial strain leads to an increase of the critical temperature, implying that achieving high temperature superconductivity becomes easier under strain," said the study's first author from the University of Belgrade's LEX Laboratory, Vladan Celebonovic.

Strain enables new applications of 2-D materials, Phys.org

Thursday, December 22, 2016

Subatomic Motion Detector...

Images Sources: See link below
Topics: Atomic Force Microscopy, Nanotechnology, NEMS, NIST, Thin Films

Scientists at the National Institute of Standards and Technology (NIST) have developed a new device that measures the motion of super-tiny particles traversing distances almost unimaginably small—shorter than the diameter of a hydrogen atom, or less than one-millionth the width of a human hair. Not only can the handheld device sense the atomic-scale motion of its tiny parts with unprecedented precision, but the researchers have devised a method to mass produce the highly sensitive measuring tool.

It’s relatively easy to measure small movements of large objects but much more difficult when the moving parts are on the scale of nanometers, or billionths of a meter. The ability to accurately measure tiny displacements of microscopic bodies has applications in sensing trace amounts of hazardous biological or chemical agents, perfecting the movement of miniature robots, accurately deploying airbags and detecting extremely weak sound waves traveling through thin films.

NIST physicists Brian Roxworthy and Vladimir Aksyuk describe their work (link is external) in the Dec. 6, 2016, Nature Communications.

The researchers measured subatomic-scale motion in a gold nanoparticle. They did this by engineering a small air gap, about 15 nanometers in width, between the gold nanoparticle and a gold sheet. This gap is so small that laser light cannot penetrate it.

However, the light energized surface plasmons—the collective, wave-like motion of groups of electrons confined to travel along the boundary between the gold surface and the air.

The researchers exploited the light’s wavelength, the distance between successive peaks of the light wave. With the right choice of wavelength, or equivalently, its frequency, the laser light causes plasmons of a particular frequency to oscillate back and forth, or resonate, along the gap, like the reverberations of a plucked guitar string. Meanwhile, as the nanoparticle moves, it changes the width of the gap and, like tuning a guitar string, changes the frequency at which the plasmons resonate.

NIST Device for Detecting Subatomic-Scale Motion Has Potential Robotics, Homeland Security Applications
Ben Stein

Tuesday, November 17, 2015

Wearable Biosensors...

A conformally contacted device on an artificial eye for glucose sensing in tears. Courtesy: YS Rim
Topics: Materials Science, Optical Physics, Semiconductor Technology, Nanotechnology, Thin Films

Okay, I have to admit: the bionic eye freaked me out. I'm trying to get used to it...

Researchers at the California NanoSystems Institute and the University of California, Los Angeles, have developed ultrathin, flexible, metal oxide semiconducting thin films for use in wearable or implantable biosensors. The devices, which are made using a straightforward printing technique, could be used as sensors in non-invasive health monitoring applications like smart contact lenses that monitor a person’s glucose levels, for example.

Nanotechweb: Metal oxide thin films make wearable biosensors

Wednesday, September 30, 2015

Wearing Well...

The world’s first stretchable and conformable thin-film transistor (TFT) driven LED display laminated into textiles developed by Holst Centre, imec and CSMT.
Topics: Consumer Electronics, Humor, Materials Science, Metamaterials, Thin Films

Okay, I've got a wearable device on my wrist that's synced to my smart phone. I often forget to put it on. I input my mass; it monitors the steps I take per day (goal of 10,000) and how long and how "deep" my sleep was. I'm often disappointed.

I could see this catching on with the young initially. As with Facebook and all other social media platforms, they'll exit as soon as the "oldsters" start wearing their favorite duds. Youngsters really should calm down...you're sounding like us.

Researchers from Holst Centre (set up by TNO and imec), imec and CMST, imec’s associated lab at Ghent University, have demonstrated the world’s first stretchable and conformable thin-film transistor (TFT) driven LED display laminated into textiles. This paves the way to wearable displays in clothing providing users with feedback.

Wearable devices such as healthcare monitors and activity trackers are now a part of everyday life for many people. Today’s wearables are separate devices that users must remember to wear. The next step forward will be to integrate these devices into our clothing. Doing so will make wearable devices less obtrusive and more comfortable, encouraging people to use them more regularly and, hence, increasing the quality of data collected. A key step towards realizing wearable devices in clothing is creating displays that can be integrated into textiles to allow interaction with the wearer.

Solid State Technology: Turning clothing into information displays

Sunday, January 22, 2012

Bundled Nanotubes and Solar Power...

A photon hits a bundle of carbon nanotubes and generates an exciton – an electron and hole bound together – and then the electron and hole rapidly separate at an interface between the tubes. Both steps are necessary to generate electric current in a solar cell. In isolated nanotubes, the exciton is reabsorbed before splitting apart. (Courtesy: J Crochet/Los Alamos National Laboratory)

Thin-film photovoltaic materials are superior to conventional solar-cell materials, such as silicon, in that they are cheaper to make, are lighter and more flexible. They work by absorbing photons from sunlight and converting these into electron–hole pairs, known as "excitons". Then, in order to generate electric current, an electron and hole must be separated quickly before the two particles come back together and are reabsorbed into the material. In existing solar cells, these excitons are usually reabsorbed too quickly, leading to low efficiencies.

Jared Crochet and colleagues believe that this process of separation within thin-film solar cells can be facilitated by adding bundles of semiconducting carbon nanotubes. The researchers have discovered that while individual nanotubes are of little use, the efficiency can be improved if the nanotubes are bundled together into groups possessing the same chirality.

Physics World: Nanotube bundles could boost solar cells